RMX 5050a

双通道功率放大器

专业音质表现,融合久经验证的QSC设计

产品特点

  • 外形紧凑 — 两个机架位可提供2500W功率,三个机架位可提供5000W功率
  • 大电流环形变压器,阻抗2欧姆时功率更高,噪音更低
  • 独立削波限幅器,减少失真,支持用户自行禁用
  • 可选低频滤波器(30Hz或50Hz)保护扬声器、增加动态余量
  • 4000W RMX4050a使用标准15A插头(120V)
  • RMX4050a和RMX5050a均拥有双单通道、大电流电源,提升可靠性和性能表现
  • RMX4050a兼具卓越的散热能力和电效率,提供稳定的散热性能,适合为阻抗为2欧姆立体声或阻抗4欧姆时桥接应用持续提供高功率输出。
  • 平衡1/4”(6.3毫米)TRS,XLR和接线柱输入
  • 防触碰接线柱和Neutrik Speakon®输出接口
  • 增益控制安装在正面,便于操作
  • 信号和削波LED指示灯,可监测性能表现
  • 每个通道均配置独立DC和热过载保护,自动保护放大器和扬声器
  • 3年质保,可选择额外延保3年
 Model RMX 850a RMX 1450a RMX 2450a RMX 4050a RMX 5050a
Power per Channel, Stereo Mode (both channels driven)
8Ω, FTC 20 Hz–20 kHz, 0.1% TDH 185 W 260 W 450 W 800 (650**) W 1050 W
8Ω, EIA 1 kHz, 0.1% TDH 200 W 300 W 500 W 850 W 1100 W
4Ω, FTC 20 Hz–20 kHz, 0.1% TDH 280 W 400 W 650 W 1300 W 1600 W
4Ω, EIA 1 kHz, 0.1% TDH 300 W 500 W (0.5% tdD) 800 W 1400 W 1800 W
2Ω, FTC 20 Hz–20 kHz, 1% TDH 1600 W 2000 W
2Ω, EIA 1 kHz, 1% TDH 430 W 700 W 1200 W 2000 W 2500 W
Power, Bridge-Mono Mode
8Ω, FTC 20 Hz–20 kHz, 0.1% tdD 530 W 800 W 1300 W 2600 W 3200 W
8Ω, EIA 1 kHz, 0.1% tdD 600 W 900 W 1500 W 2800 W 3600 W
4Ω, EIA 1 kHz, 1% tdD 830 W 1400 W 2400 W 4000 W 5000 W
100 V Direct Drive, EIA 1 kHz, 1% THD 600 W 2300 W​
Signal to Noise (20 Hz–20 kHz) -100 dB
Distortion (SMPTE-IM) < 0.01% < 0.02%
Input Sensitivity at 8Ω 1.15V (+3.4dBu) 1.23V
(+4.0 dBu)
1.42V (+5.3 dBu)
Voltage Gain 31.6x (30 dB) 40x (32 dB) 50x (34 dB) 64x (36 dB)
Output Circuitry Class AB 2-tier Class H 3-tier Class H
Current Draw (120 V AC)
Typical, 1/8 power pink noise at 4Ω*
Severe, 1/3 power pink noise at 4Ω*

4.5 A
6.6 A

6.0 A
9.6 A

6.3 A
15.6 A

10.0 A
20.1 A

13.9 A
26.9 A
AC Mains Plug
100/120V
230V
NEMA 5-15
CEE7/7

NEMA 5-20
CEE7/7
Weight
Net
Shipping

35 lb (15.9 kg)
41 lb (18.6 kg)

40 lb (18.2 kg)
46 lb (20.9 kg)

44.5 lb (20.2 kg)
50.5 lb (23 kg)

68 lb (30.8 kg)
77 lb (34.9 kg)

75 lb (33.1 kg)
87 lb (37.2 kg)
Distortion (typical)
20 Hz–20 kHz, 10 dB below rated power
1 kHz and below, full rated power

< 0.03% tdD, 4Ω and 8Ω
< 0.03% tdD, 4Ω and 8Ω

< 0.02% tdD, 4Ω and 8Ω
< 0.02% tdD, 4Ω and 8Ω
Frequency Response 20 Hz–20 kHz: +0/-1 dB -3 dB points: 5 Hz and 50 kHz (LF filter bybassed, 8Ω)
Damping Factor (1 kHz and below) > 300 at 8Ω > 250 at 8Ω
Input Impedance 10 kΩ unbalanced; 20 kΩ balanced
Input Stage Clipping 10 V rms (+22 dBu) 6.4 V rms (+18 dBu)
Cooling Continuously variable speed fan, back-to-front air flow
Connectors (each channel) Input: Active balanced; 3-pin Euro-style detachable terminal block and XLR (pin 2+)
Output: Touch-proof binding posts; Neutrik Speakon®
Controls Front: AC switch; Channel 1 & 2 gain knobs
Rear: 10-position DIP switch
LED Indicators Power on: Green; Signal: Yellow (1 per channel); Clip/Protect: Red (1 per channel)
Amplifier Protection Full short circuit, open circuit, tdermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
Load Protection Turn-on/off muting; AC coupling (850, 1450); Triac crowbar (1850HD, 2450, 4050HD, 5050) on each channel
Dimensions 3.5” (8.9 cm) tall; 2 rack spaces 5.25” (13.3 cm) tall; 3 rack spaces
Power Requirements 100, 120, 230 V AC (factory configured), 50–60 Hz

 

All specifications are subject to change without notice.