E110是一款紧凑型阻抗8Ω的二分频扬声器,采用10英寸压铸框架,2.5英寸音圈,多功能箱体可作为舞台监听或主扩声系统使用。融合了QSC 的DMT(Directivity Matched Transition,指向匹配技术)设计,覆盖角度可达 85° 。作为舞台监听使用时,可将E110的覆盖角度调节至 55°,当舞台拥挤时将其放置在演出人员附近。

E系列扬声器可搭配任何品质的专业功率放大器使用 – 但整套的E系列娱乐系统能够提供更多功能选择。当今的有源扬声器大多依靠精准调试的数字信号处理器(DSP)来实现更高级别的性能表现。当搭配QSCGXDPLD放大器或TouchMix数字调音台使用时,E系列扬声器也可充分利用高级DSP处理能力。QSC开发了可搭配这三个平台使用的E系列DSP相关设置。这些设置支持多种应用,包括现场声效增强(有无重低音扬声器均可)、舞台监听、舞曲和卡拉OK。

Features

  • High output, professional quality sound with 300 W continuous power
  • E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  • E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:

             - For PLD/CXD visit Amplifier Navigator Software
             - For GXD visit the GXD Firmware Updater

  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Suitable for main PA and stage monitor
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket
Model E110
Configuration 1 × 10-inch, 2-way, non-powered 
Frequency Response (-6 dB) 68Hz – 20kHz
Frequency Range (-10 dB) 50Hz - 20kHz
Power capacity²: continuous/peak 300 W / 1200 W
Sensitivity 95 dB, 1 W @ 1 m
Coverage Angle 85° conical DMT
Output1 (Peak SPL @ 1m) 126 dB

Drivers

LF

HF

 

254 mm (10 in) driver with 64 mm (2.5 in) voice coil;

25 mm (1 in) exit, 45 mm (1.75 in) voice coil, compression driver 

Nominal Impedance
Cross-over Full-range only, 1.8 kHz
Input Connections 2 × NL4, 1 × barrier strip
Enclosure Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.
Mounting and suspension 9 × M8 suspension points, dual angle, 35 mm pole-socket
Speaker Dimensions
(W×H×D) 
330 × 560 × 330 mm
13 × 22 × 13 in
Carton Dimensions (H×W×D) 430 × 430 × 660 mm
17 × 17 × 26 in
Net speaker weight 20 kg / 44 lb
Shipping weight 23 kg / 50 lb
   

1 With QSC Processing
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.

*Preliminary specifications are subject to change.