Axon D2i

Dante™/AES67 network audio interface (Attero Tech)

The Attero Tech Axon D2i is a single-gang, Dante/AES67 network audio I/O wallplate for network AV systems, including Q-SYS. With two balanced mic/line inputs in a cost-effective form-factor, it provides easy integration of analog devices into a wide range of network audio applications. A Q-SYS Extension further simplifies integration, letting integrators quickly add the Axon D2i to Q-SYS installations without the need for any programming.


Connect to Q-SYS Reflect Enterprise Manager

This Q-SYS Product can be connected to our powerful monitoring and management solution.

Start your free trial today!

Features & Benefits

  • Two (2) balanced mic/line inputs ona 3-pin XLR (mic level) with combination ¼" TRS connector (line level)
  • +48 V phantom power
  • Integrated Axiom port enables integration of Attero Tech by Axiom wallplates into network AV systems (includes RS-232 control pass-through)
  • PoE (802.3af)
  • Available Q-SYS Extension
  • Dante Domain Manager ready
  • Ships with both black and white Decora faceplates and fascia inserts

Convenient I/O Integration
The Axon D2i Dante/AES67 network audio I/O wallplate features two XLR+1/4” TRS combo inputs to provide an easy on-ramp for microphones, instruments or mixer outputs into a networked AV system. This enables portable applications, such as presentations, conferences or pop-up events, where conveniently located audio connectivity is a must.

Axiom Port for Added Flexibility
The Axon D2i provides connectivity for Axiom devices through the Axiom port on the wallplate's rear panel. This allows integrators to pair the Axon D2i with any Axiom wallplate (USB, Bluetooth, or XLR) for added I/O customization in applications where analog audio devices need to be network routable.

Q-SYS Integration
With the available Q-SYS Extension, integration of the Axon D2i into Q-SYS is simple. Quickly deploy the wallplate into your Q-SYS design, exposing audio control and signal monitoring of the Axon D2i or connected Axiom devices via native Q-SYS touch screens without the need for any programming (as of Q-SYS Designer Software v8.4, the Q-SYS Scripting Engine license is not required to deploy designs with Attero Tech devices).

Specifications:

Audio  
Input type Combination XLR/TRS balanced mic/line connector
Gain XLR (mic level): -8 dB to +34 dB, 1 dB steps
TRS (line level): fixed 16dB pad accommodates +24 dBu input levels
Frequency response 20 to 20 kHz, ± 1 dB at all attenuation settings
Axiom  
Physical layer Analog audio, RS-232 control, 24 V DC power
Connector 8P8C
Dante™/AES67 Network  
Connector RJ-45
Transmission speed 100 Mbps
Supported bit rates 16, 24
Power  
PoE power 802.3af Class 0
General  
Dimensions (HWD) 4.2 x 1.7 x 2.1 in (106.7 x 43.2 x 53.3 mm)
Decora wall plate (1-gang): 4.87 x 3.12 x 0.08 in (123.7 x 79.25 x 2.03 mm)​
Weight 0.33 lbs (0.15 kg)