TouchMix Firmware and Control App

TouchMix-30 Pro Windows® USB Driver (Beta)

This driver connects a TouchMix-30 Pro mixer's digital audio inputs and outputs to Windows via USB. The driver provides a 32 x 32 channel, audio-only connection – control data interface is not supported. QSC recommends that this driver be used with Windows 10 although it will also operate in a Windows 7 environment. With firmware version 1.3, TouchMix-30 adds an Automatic Microphone Mixer. Auto Mixers are most commonly used for speech applications such as conferences, presentations or panel discussions in which there are multiple talkers and multiple microphones. An Auto Mixer will reduce feedback and minimize extraneous noise (such as paper rustling from panelists or HVAC) by allocating gain to microphone channels with active talkers while reducing the gain of unused channels. The TouchMix-30 Automatic Microphone Mixer (Auto Mixer) is a gain sharing design that is available for all 24 mic/line input channels

Please note that this is a Beta version and is still undergoing final testing. View the Windows USB Driver Installation Instructions.

Download TouchMix-30 Pro Windows USB Driver

TouchMix-30 Pro

Control App

Firmware
(Please read the PC or macOS® installation instructions below prior to downloading firmware)

Windows USB Driver (Beta)
(TouchMix-30 Pro supports macOS® DAW natively
via Core Audio. No additional driver required)

1.3.09373

TouchMix-8 and 16

Control App

Firmware
(Please read the PC or macOS® installation instructions below prior to downloading firmware)

Sign-up for TouchMix Notifications