- Contemporary style, weather-resistant enclosure and components - ideal for a wide range of applications.
- Dual 8-inch, 2-way system - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill.
- Versatile mounting options - The included yoke mount bracket can be used for mounting and aiming the system in vertical or horizontal orientations. Provision for optional Omni-mount™ bracket is built in.
- Advanced Directivity™ rotatable waveguide - (90° × 60°) enables the loudspeaker to deliver accurately focused sound, regardless of the enclosure's mounted orientation.
- Low impedance and transformer versions - Standard 8 ohm system is selectable for passive or bi-amp operation while the AD-S282HT transformer version provides taps for both 70V and 100V distributed system use.
AD-S282H or AD-S282HT loudspeaker
Yoke mount and hardware
Connector protection cap
|SPECIFICATIONS||AD-S282H / AD-S282HT|
|Configuration||Compact two way, ported enclosure|
Low Frequency Transducer
High Frequency Transducer
|Dual 8" high power, treated paper cone, 2" voice coil, neodymium magnet |
1" high output compression driver
|Frequency Range1 |
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB)
80 Hz - 27.7 kHz
60 Hz - 29.5 kHz
|Maximum Output (SPL at 1 m)2 |
Fullrange (passive mode)
LF (biamp mode)
HF (biamp mode)
|Nominal Impedance |
|Power Rating3 |
450 W (IEC 8 hours)
500 W (IEC 8 hours, 50 Hz - 2 kHz)
45 W (IEC 8 hours, 2 kHz - 20 kHz)
|Recommended Max Amp Power (Passive)||900 W RMS|
|Sensitivity (SPL, 1 W at 1 m)4 |
93 dB (100 Hz - 10 kHz)
97 dB (200 Hz - 2 kHz)
104 dB (2 kHz - 10 kHz)
|Nominal Coverage||90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V)|
|Bass Loading||Ported, tuned to 60 Hz|
|Type||Custom low distortion laminated core, wide bandwidth design|
|Taps||70V 200, 100, 50, 25 W; 8Ω bypass |
100V 200, 100, 50 W; 8Ω bypass
|Material||Injection molded, weather resistant, high impact polystyrene|
|Finish||White or black (paintable)|
|Grille||Heavy duty powder coated aluminum|
|Connectors||Barrier strip, (switchable: passive/active on AD-S282H)|
|Mounting Hardware||Yoke mount (included)|
|Weight||27.7 lb (12.6 kg) net |
35.6 lb (16.1 kg) shipping
1 All frequency ranges specified refer to measured free field response (full space, 4pi)
2 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
3 Continuous IEC specified test signal
4 Based on nominal impedance, measured in full-space.
All specifications are subject to change without notice.