AD-S6

6", 2 vías, cobertura cónica DMT de 105°


Features

  • Woofer de 6.5" con tratamiento contra la intemperie
  • Cobertura cónica DMT de 105°
  • Pico máximo de nivel de presión sonora de 116 dB (16 Ω)
  • DMT (Directivity Matched Transition™) garantiza una respuesta de frecuencia fluida y uniforme en la zona de cobertura
  • El sistema X-Mount™ permite instalar fácilmente el altavoz y colocarlo en una variedad de ángulos sin que se deslice con el tiempo
  • Filtros avanzados de ecualización mediante Intrinsic Correction™, de QSC, disponible a través de las plataformas de procesamiento de audio en red Q-SYS™ y de los amplificadores CXD
  • Gabinetes ligeros de ABS que ofrecen durabilidad a largo plazo y una buena apariencia durante mucho tiempo
  • Placa de cubierta de conexiones sellada y rejillas de aluminio con recubrimiento en polvo para mayor resistencia a la intemperie
  • Cumple con la normativa IEC60529 IP54 para resistencia al polvo y salpicaduras
  • Disponible en negro (RAL 9011) y en blanco (RAL 9010)
  • Información completa de EASE, CF2, CAD, y BIM disponible en internet
System Details AD-S6
HF transducer 1" silk dome tweeter / 1" voice coil, horn loaded
LF transducer 6.5" weather treated paper cone woofer

1.5" / 38 mm voice coil
Effective frequency range1,2,3,8 58 Hz - 20k Hz
Rated noise power / voltage6 150 W / 49 V (rms)
Broadband sensitivity2,3,4,8 89 dB SPL
Coverage angle (-6 dB)2,5,8 105° conical DMT
Directivity factor (Q)2,5,8 5
Directivity Index 7 dB
Maximum continuous SPL7 110 dB
Maximum peak SPL7 116 dB
Rated impedance 16 Ω
Recommended amplifier power 300 W
Input connector type Euroblock connector with parallel output
Enclosure material Painted ABS polymer
Grille material Powder coated aluminum
Enclosure Details
Ingress protection IP-54
Operating environment Designed for indoor and outdoor use
Testing The AD-S6 Series loudspeakers qualified for outdoor use using the following tests:
 
  • Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
  • Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
  • High and low temperature: tested to QSC internal standards between -20° and 50° C
 
Operarating temperature range -20 to 50 °C / -4 to 122 °F
Net weight 11.6 lb / 5.26 kg
Product dimensions
(HWD) inches
14.4 × 8.5 × 8.5
Product dimensions
(HWD) mm
365 × 215 × 215
Shipping weight 28.7 lb / 13.02 kg (pair packed)
Shipping dimensions
(HWD) inches
20 × 12 × 23 (pair packed)
Shipping dimensions
(HWD) mm
510 × 305 × 585 (pair packed)
Included accessories Patented X-Mount™ mounting system, Euroblock connector,
input panel cover

1 -10 dB from rated sensitivity
2 Full-space, 4 m
3 Reference axis
4 70-20 kHz average
5 1k-10 k Hz average
6 IEC, 2hrs, based on 16 Ω nominal impedance
7 Calculated from rated noise power and sensitivity
8 Reference plane is the plane with the loudspeaker baffle plane. Reference axis is the axis perpendicularto the reference plane and passing through the center of the baffle. Vertical plane is the plane intersecting the reference plane at a right angle, including the reference axis. Horizontal plane is the plane intersecting the reference plane and the vertical plane at a right angle, including the reference axis.


All specifications are subject to change without notice.