PowerLight 3系列是我们“终极模拟”大功率放大器,专为要求最为严苛的音乐会和现场扩音应用设计。PL380均采用革命性PowerLight™电源技术,显著减轻重量,减少交流电源杂音,提升音频质量。Q-SYS联网平台可提供综合远程控制和监测功能。

  • D类拓扑结构在极端功率负载情况下,能够提供高效表现
  • 三位输入灵敏度开关保证增益匹配现有放大器机架和功率系统
  • 配置用户可禁用削波限幅器和可选低频滤波器(30 Hz,50 Hz,跨接)
  • DataPort接口支持外部放大器控制,可通过Q-SYS进行监测
  • 提供XLR和Block输入接口、接线柱或Neutrik speakON®输出接口
  • 综合内部保护系统可防止功放和扬声器电流过大、温度过高或削波影响,同时不影响演出信号

产品特点

  • PowerLight开关电源可提供最高效率,提升音频性能
  • 流通式空气通道和坚固的铝制散热器可达到最佳的散热效果
  • DataPort接口支持远程网络控制,可通过Q-SYS进行监测
  • 平滑的步进式增益控制精度为-1dB
  • 可拆卸旋钮,搭配安全外罩防止未授权操作
  • 配置用户可禁用削波限幅器,每通道可选择低频滤波器(3Hz、30Hz或50Hz)
  • 三种可选增益结构(26dB、32dB或1.2V)
  • 前后面板LED灯指示开关设置情况,一目了然
  • 并联XLR/M和XLR/F接头,支持简易环路连接
  • Neutrik Speakon® 和“防触碰”接线柱输出
  • 即使在路途中Neutrik Speakon®电源线仍有安全保证
  • 3年质保,可选择额外延保3年
  • 线性H类输出电路是B类效率的两倍,减少交流电流消耗,降低散热性能需求
  • D类输出回路提供大功率输出,降低损耗,可以将平均交流功率上升降低到最低水平,相对于旧式大功率放大器,极大减少了功率分配需求


SPECIFICATIONS PL380
  OUTPUT POWER PER CHANNEL, STERO MODE, both channels driven
8Ω EIA 1 kHz 1% THD 1500 W
4Ω EIA 1 kHz 1% THD 2500 W
2Ω EIA 1 kHz 1% THD 4000 W*
  OUTPUT POWER, BRIDGE MONO MODE
8Ω EIA 1 kHz 1% THD 5000 W
4Ω EIA 1 kHz 1% THD 8000 W*
Typical Distortion
(20 Hz–3 kHz, 3 dB below clip, or 20 Hz–5 kHz, 10 dB below clip, or 20 Hz–20 kHz, 20 dB below clip)
8 ohms
4 ohms
2 ohms




0.01-0.03%
0.03-0.06%
0.1%
Maximum Distortion
(20 Hz–20 kHz, 1 dB below rated power)
4 to 8 ohms


0.2%
Frequency Response (8 ohms) 20 Hz–20 kHz, ±0.2 dB
Noise (20 Hz–20 kHz, 32 dB Gain) -104 dB
Dynamic Headroom (4 ohms) 2 dB
Damping Factor (8 ohms) 200
Output Circuitry Class D
Input Sensitivity
26 dB Setting
32 dB Setting

5.27V
2.67V
Maximum Gain (1.2V setting) 39.1 dB
Maximum Input Level
1.2V setting
32 dBu setting
26 dBu setting

10 V (+22 dBu)
22 V (+29 dBu)
25 V (+30 dBu)
AC Power Requirements **
120V 50/60 Hz
230V 50 Hz

18 A
11 A
Cordset
120V 50/60 Hz
230V 50 Hz

NEMA L5-30P
CEE 7/7 16A
Chassis Power Connector
All Voltages

32A PowerCon
Input Impedance > 10 kΩ balanced, or unbalanced
Cooling Variable-speed fan, rear-to-front air flow
Connectors (each channel) Input: XLR Male, XLR Female and 3-pin detachable terminal blocks (1 each per channel)
Output: Neutrik Speakon® (ch 1 wired to both channels) and 5-way binding posts
DataPort: HD-15, input signal in parallel with XLR input connectors
Front Controls AC power switch
Gain controls, 21 detents, 1 dB steps (each channel)
Front Indicators (LED color) Power (Blue)
Bridged (Yellow)
Parallel (Orange)
Clip/Prot (Red × 2)
Level -10 (Orange × 2)
Level -20 (Green × 2)
Signal -35 (Green × 2)
Rear Controls (with LED indicators) Input Mode: Bridge (Yellow), Stereo (Green), or Parallel (Orange)
Gain / Sensitivity: 26 dB (Orange), 32 dB (Green), or 1.2V (Yellow)
High Pass (each channel): 3 Hz (Off), 30 Hz (Yellow), or 50 Hz (Orange)
Clip Limiter (each channel): Off, on (Yellow)
Amplifier and Load Protection Short circuit, open circuit, thermal, RF protection. On/off muting, DC fault shutdown, active inrush limiting
Product Dimensions (H×W×D) 89 (2 RU) × 483 × 397 mm
3.5 (2 RU) × 19 × 15.63 in
Carton Dimensions (H×W×D) 610 × 560 × 178 mm
24 × 22 × 7 in
Net Weight 11 kg / 24 lb
Shipping Weight 15.0 kg / 33 lb
Agency Approvals UL, CE, RoHS/WEEE compliant, FCC Class B (conducted and radiated emissions)

U.S. Patent no. 5767744 and patents pending
*Burst mode testing required due to AC service current limitations
** Representative of current draw with typical music program material with occasional clipping

All specifications are subject to change without notice.