K Series

The QSC K Series is quite simply the new standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, all full-range models (K8, K10, K12) are fitted with the identical 1.75" high-frequency (HF) device for unparalleled performance, regardless of speaker size.  Extensive digital signal processing (DSP) is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight. Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.

K Series full-range models are housed in rugged yet light ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Integral M10 suspension points and optional yoke mount accessories combined with the light weight enclosure make the K series a perfect choice for permanent installation.

Directivity Matched Transition (DMT™) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.

Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.

DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.

GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.

Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility. 

On-board switches provide preset EQ settings. The HF setting (full-range models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP™ for additional bass extension, or EXT SUB (full range models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.

SELECT A MODEL

Loudspeakers

Model K8 K10 K12
Frequency Range
(-10 dB)
61 Hz – 20 kHz 56 Hz – 20 kHz 48 Hz – 20 kHz 
Nominal Coverage
(-6 dB)
105° conical DMT 90° conical DMT 75° conical DMT
Output 1
(Peak SPL @ 1M)
 127 dB 129 dB   131 dB
Amplifier Power  1000 W continuous Class D
Current Consumption
1/8 Power 2
 100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A   
Driver Information  LF: 8" cone transducer
HF: 1.75" diaphragm
compression driver 
LF: 10" cone transducer
HF: 1.75" diaphragm
compression driver 
LR: 12" cone transducer
HF: 1.75" diaphragm
compression driver 
Input Connectors  Balanced female XLR / 1/4" mic/line level input • Balanced
female XLR / 1/4" line level input • 2 x RCA (Phono)  
Enclosure Impact-resistant ABS 
Net Weight 27 lb / 12.2 kg  32 lb / 14.5 kg   41 lb / 18.6 kg
  Details Details Details

1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for LF-only and subwoofer systems) and peak power capability of amplifier.
2 1/8 power is representative of current draw with typical music program material with occasional clipping.

All specifications are subject to change without notice.


Subwoofer

Model KSub
Frequency Range
(-10 dB)
44 Hz – 148 Hz
Nominal Coverage
(-6 dB)
N/A
Output 1
(Peak SPL @ 1M)
130 dB 
Amplifier Power 1000 W continuous Class D
Current Consumption
1/8 Power 2
 100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A
Driver Information LF: Dual 12" cone transducers
HF: N/A 
Input Connectors  Balanced female XLR / 1/4" mic/line level input • Balanced
female XLR / 1/4" line level input • 2 x RCA (Phono)  
Enclosure Painted birch plywood 
Net Weight 74 lb / 33.6 kg 
  Details 

1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for LF-only and subwoofer systems) and peak power capability of amplifier.
2 1/8 power is representative of current draw with typical music program material with occasional clipping.

All specifications are subject to change without notice.


Accessories

Model Yoke Mount M10 Eyebolt
Kit-C
Tote Outdoor Cover Pole
Extension
K8
K10
K12  
KSub