ILA Series

ILA is a line array system designed specifically for installation in a variety of venues including houses of worship, sports facilities, clubs and other entertainment venues. ILA System v2 is a complete system consisting of line array, subwoofer, processing, amplification and suspension accessories. The result is an accessible system with very high performance, moderate cost and ease of deployment.

Most line array systems currently available are designed for touring applications, which require extreme ruggedization and expensive suspension hardware. As a result, overall system cost is driven beyond the means of many facilities that could benefit from line array performance. By focusing on installation applications, using a molded enclosure and simplifying the rigging design, QSC has driven cost out of the ILA System while retaining the sound quality, coverage and power of high end touring line array systems.


Each Installation Line Array element uses a pair of high-power, neodymium magnet, 8" diameter low-frequency drivers. Both woofers produce low frequencies but only one covers the mid-range resulting in more uniform directivity in the crossover region.

For high frequencies, a pair of 1.75" (voice coil diameter) neodymium compression drivers with titanium domes are mounted on a multiple aperture diffraction waveguide* that provides extremely wide coverage (140º). As a result, a WL2082-i system will rarely require additional side or center fill speakers and solid stereo imaging is preserved across the listening area. The system may be used in bi-amplified or tri-amplified mode. In general, the tri-amplified mode will produce the best performance and, for arrays larger than four boxes, will not increase the total cost of system amplification. 

Available in black or white, the WL2082-i enclosure is made of high impact polystyrene with extensive internal ribs to eliminate acoustic losses due to sidewall flex. The Installation Line Array is IP33 rated, and may be used in limited outdoor applications where the system is not directly exposed to the elements. The enclosure material is formulated with UV inhibitors, the grille is made of aluminum and the woofer cones are weather resistant.

Rigging for the ILA is simple, flexible and safe providing a 10:1 design factor with twelve WL2082-i systems in the array (see the owner’s manual for details before planning any array suspension). The array is assembled with the included bolts and the relative angle between adjacent boxes is adjustable in 1º increments for precise tailoring of vertical coverage. For those who prefer quick release pins to the included bolts, an optional kit of four quick release pins (QRP-KIT-1) is available.

The subwoofer for ILA System v2 is the WL118-sw, a single 18" version of the popular WideLine-10 touring, dual 18" subwoofer and offers an impressive combination of punch and low-frequency extension. ILA subs may be suspended at the top of an ILA array using the standard FP2082-i array frame. When trim height is limited, the ILA sub may be suspended behind the array using the available EB2082-i extension bar.  For applications where the subwoofer does not need to be suspended in the array, there is a General Purpose version of the WL118-sw called the GP118-sw.

Modern line arrays rely on digital signal processing to perform their best. QSC has developed a sophisticated approach to creating system tunings that improve performance and dramatically simplify system set-up.

Intrinsic Correction is far more than just signal processing. It is also a process that begins by taking extensive laboratory measurements of the loudspeaker and then spatially averaging those measurements using a proprietary algorithm. Once the spatially averaged response of the loudspeaker is determined, a combination of IIR and FIR filters is applied to adjust the time, frequency and amplitude response to a maximally flat band-pass target. 

The result is that signal processing adjustment is no longer a task requiring complicated test gear, prolonged measurements and golden-eared experts. These presets are found in the QSC PLD & CXD series of DSP power amplifiers; using either the front panel or Amplifier Navigator software, simply input the number of boxes in the array and the array’s total included coverage angle - the PLD or CXD amplifiers will do all the necessary calculations.

 

 
 

SELECT A MODEL

Loudspeaker

Model WL2082i
Speaker Dual 8" + comp. driver, biamp/triamp
Power Continuous / Program / RMS Voltage HF 100 W / 400 W / 40 V
LF, MF 200 W / 800 W / 57 V
Impedance HF: 16Ω
LF biamp: 8Ω
LF, MF triamp: 16Ω
Peak SPL 132 dB
Input Connectors 2 x NL8
Dimensions (HWD) inches 11.8 x 27 x 13.4
Dimensions (HWD) mm 300 x 686 x 340
Net Weight 37 lb / 16.8 kg
  Details

 

All specifications are subject to change without notice.

Subwoofers

Model WL118-sw GP118-sw
Speaker Single 18" Single 18"
Power Continuous / Program / RMS Voltage 850 W / 3400 W / 82 V
Impedance
Peak SPL 134.5 dB 135 dB
Input Connectors 2 X NL8/ 2 X NL4
Dimensions (HWD) inches 22.1 X 27.6 X 30.3  20.9 x 25.8 x 30.4
Dimensions (HWD) mm 562 X 702 X 771  531 x 656 x 772
Net Weight  111 lb/ 50.4 kg 111 lb / 50.3 kg 
  Details Details

All specifications are subject to change without notice.

Accessories

Model  EB2082-i FB2082-i PB2082-i QRP-KIT-1
WL2082i        
WL118-sw        
GP118-sw