AcousticDesign™ Series - Ceiling Mount

AcousticDesign™ ceiling loudspeakers offer a variety of models specifically tailored for demands of higher fidelity applications.  Designed for clarity and presence, these loudspeaker systems deliver pristine audio reproduction for installations requiring a refined audio experience. 

SELECT A MODEL

Small Format

  AD-C4T AD-C4T-LP AD-C6T AD-C6T-LP
Systems Type 2-way 2-way, shallow can 2-way 2-way, shallow can
Frequency Range,
-10dB(Hz)
70Hz–20kHz 70Hz–20kHz 65Hz–20kHz 65Hz–20kHz
Nominal Coverage 150° conical DMT™ 150° conical DMT™ 140° conical DMT™ 140° conical DMT™
Output ([email protected]) 108dB 108dB 112dB 112dB
Rated noise power¹ 30 30 60 60
Sensitivity² 87.5 87 88 88
LF Driver 4.5in (114mm) 4.5in (114mm) 6.5in (152mm) 6.5in (152mm)
HF Driver 0.75in (19mm) 0.75in (19mm) 0.75in (19mm) 0.75in (19mm)
Transformer Taps 70V:30,15,7.5,3.75W
and 16 bypass
100V:30,15,7.5W
and 16 bypass
70V:30,15,7.5,3.75W
and 16 bypass
100V:30,15,7.5W
and 16 bypass
70V:60,30,15,7.5W
and 16 bypass
100V:60,30,15W
and 16 bypass
70V:60,30,15,7.5W
and 16 bypass
100V:60,30,15W
and 16 bypass
Input Connectors Euroblock connector with
parallel output terminals
Euroblock connector with
parallel output terminals
Euroblock connector with
parallel output terminals
Euroblock connector with
parallel output terminals
Dimensions (W x D)
inches
9.06 x 6.94 11.02 x 3.93 11.02 x 9.32 13.37 x 3.95
Dimensions (W x D)
mm
230 x 176 280 x 100 280 x 237 340 x 100
Net Weight 6.4lb (2.9kg) 6.6lb (3kg) 9.5lb (4.3kg) 9.3lb (4.2kg)
  Details Details Details Details

¹ Continuous IEC specified test signal, 2 hours unless otherwise stated.
² Transformer Bypassed, 1w, 1m, 2π (infinite baffle), 200-10kHz average, on axis.


All specifications are subject to change without notice.

Large Format

  AD-C820 AD-C821 AD-C1200
System Type 2-way ported 2-way ported 2-way ported
Frequency Range,
-10 dB (Hz)
52 Hz - 18 kHz  52 Hz - 18 kHz  37 Hz - 18 kHz
Nominal Coverage 90° conical 90° conical 90° conical
Power Capacity1  200 W (100 hrs)  200 W (100 hrs) 300 W (100 hrs)
Sensitivity2  91 dB  91 dB 93 dB
LF Driver  8" weather resistant,
treated paper cone woofer
 12" weather resistant,
treated paper cone woofer,
75 mm voice coil, ferrite magnet
HF Driver 1.4" co-axial
compression driver 
1.75" co-axial compression driver
Controls / Selectors  70 V: 100, 50, 25, 12.5 W
100 V: 100, 50, 25 W
16Ω Externally Selectable
 70 V: 150, 75,
37.5 W
100 V: 150, 75, 37.5, 18.2 W
16Ω Internally Selectable 
Input Connectors AD-C820: Ceramic block 
AD-C821: 4-pin Euro terminals
Fire protective sub-chamber
 Ceramic block terminals
Fire protective sub-chamber 
Suspension /
Attachment Point
AD-C820: Pre-installed back box with 4 mounting straps
AD-C821: Captive, integral mounting clamps 
Pre-installed back box with 4 mounting tabs 
Dimensions (HWD)
inches
14.9 x 14.9 x 8.3 23 x 18 x 15.5
Dimensions (HWD)
mm
379 x 379 x 211 584 x 454 x 393
Net Weight 17.5 lb / 7.9 kg 78 lb / 35.3 kg
  Details Details Details

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.


All specifications are subject to change without notice.

 

Legacy Loudspeakers

  AD-C42T AD-Ci52T AD-Ci52ST
System Type 2-way Sealed 2-way Sealed  2-way ported,
shallow can 
Frequency Range,
-10 dB (Hz)
60 Hz - 20 kHz 60 Hz - 20 kHz 53 Hz - 20 kHz
Nominal Coverage 100° conical 90° conical  100° conical 
Power Capacity1 40 W (100 hrs) 40 W (100 hrs) 40 W (100 hrs)
Sensitivity2 88 dB 86 dB  87.5 dB 
LF Driver 4.5" weather resistant, polypropylene cone woofer 5.25" weather resistant, low distortion fiberglass cone woofer,
25 mm voice coil, neodymium magnet
HF Driver 0.75" titanium dome tweeter, rubber surround 1" titanium dome tweeter, rubber surround
Controls / Selectors 70 V: 30, 15, 7.5,
3.8 W
100 V: 30, 15, 7.5 W
8Ω Externally Selectable
70 V: 30, 15, 7.5, 3.8 W
100 V: 30, 15, 7.5, 3.8 W
8Ω Externally Selectable 
Input Connectors Ceramic block or 4-pin Euro terminals,
fire protective sub-chamber
4-pin Euro terminals,
fire protective sub-chamber
Suspension /
Attachment Point
N/A N/A  N/A 
Dimensions (HWD)
inches
7.5 x 7.5 x 9.3 8.5 x 8.5 x 9.3  12.6 x 12.6 x 3.75 
Dimensions (HWD)
mm
191 x 191 x 236 216 x 216 x 236  321 x 321 x 95 
Net Weight 6.1 lb / 2.7 kg 7.5 lb / 3.4 kg  8 lb / 3.7 kg 
  Details Details Details

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.


All specifications are subject to change without notice.

 

Subwoofer

  AD-C81Tw
System Type Ported subwoofer
Frequency Range, -10 dB (Hz) 28 Hz - 208 Hz
Nominal Coverage N/A
Power Capacity1 100 W (100 hrs)
Sensitivity2 92 dB
LF Driver 8" weather resistant,
polypropylene cone woofer,
rubber surround
HF Driver N/A
Controls / Selectors 70 V: 60, 30, 15, 7.5 W
100 V: 60, 30, 15 W
8Ω Externally Selectable
Input Connectors Ceramic block or 4-pin Euro terminals,
fire protective sub-chamber
Suspension/Attachment Point N/A
Dimensions (W x D) inches 12.6 x 14.5
Dimensions (W x D) mm 321 x 368
Net Weight 20 lb / 9.1 kg
  Details

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.


All specifications are subject to change without notice.

Accessories

  Mud Ring New Construction Ring
AD-C4T AD-MR4  N/A 
AD-C4T-LP AD-MR6  N/A 
AD-C6T AD-MR6  N/A 
AD-C6T-LP AD-MR8  N/A 
AD-C820   N/A N/A
AD-C821  ADC-MRS ADC-NCS
AD-C1200 N/A N/A
AD-C81Tw  ADC-MRS ADC-NCS