Firmware Change Log

TouchMix Firmware Change Log:

Version 3.0.08130

This release is a major feature and functionality update for the TouchMix-8 and TouchMix-16. It implements many features from the TouchMix-30 Pro.

Version 2.1.5035

This release adds improved recording stability with a wider range of qualified hard drives.

Version 2.1.4922

This release enables remote control via smart-phones and tablets running the Android operating system. In addition it includes a number of bug fixes and improvements.

  • Fixed a problem with fine frequency adjustment at 100 Hz, 1 kHz and 10 kHz points on the channel equalizer.
  • Fixed an issue that caused an erroneous “The description cannot be blank” message associated with the Remote Control Settings screen under certain conditions.
  • User button and MIDI setup displayed erroneous FX Mute Group label.
  • Fixed a bug that caused linked aux. channels to remain linked after a channel reset.
  • Removed a non-functioning “Omit Output” toggle on the Outputs > Presets screen.
  • Added a pop-up “wait 5 seconds” screen to warn against premature removal of a USB device when a scene is saved.
  • Repaired an issue that caused meter crashes when the maximum number of (twelve) smart-phone or tablet devices were connected to a single mixer.
  • Fixed a bug that caused the Main Fader to be inaccessible when logging in from a security auto-timeout.
  • Fixed non-responsive “Load Session” assignment in the User Buttons section.
  • Fixed a bug that caused the FX Fader Select on User and MIDI buttons to function improperly under certain conditions.
  • Fixed a bug that allowed MIDI buttons to be double assigned.
  • Fixed a bug that prevented the FX Wizard FX type from refreshing when the effect type is changed.
  • Implemented improvements to reduce dropouts when very long recordings are made on very high-capacity hard drives.

Version 2.1.4648

This is a maintenance release that addresses bugs and known issues introduced by version 2.1.4583.

  • Fixed a bug that caused the auxiliary mixes to be assigned to the Main L/R output when a scene that was last saved in version 2.0 was recalled.
  • Fixed a problem that occurred when connecting iOS devices with pre-existing security and permission assignments to the mixer.

Version 2.1.4583

  • Support for MIDI-over-USB footswitches
  • Option to omit output settings from scene recall
  • Multi language info system
  • Auxes to Main L/R assignability
  • The frequency with which mixer data is auto-saved to internal memory has been changed for improved compatibility with solid-state memory device management algorithms.
  • Corrupted internal memory may now be restored from an external USB drive.
  • A problem that caused occasional low output levels after a hard power cycle has been remedied.
  • Fixed issues relating to iPad and security.
  • Fixed an issue that caused 2-track playback problems after the mixer is brought out of standby.
  • Fixed an issue that caused an output clip when the Noise Generator is enabled and the mixer is brought out of standby.
  • Multiple improvements to Wi-Fi and network connectivity.

Version 2.0. 4168

  • Support for iOS personal monitor control
  • Access control for remote devices
  • Additional Wi-Fi connectivity options
  • Password security access
  • Programmable user buttons
  • Additional auxiliary pick-off point options
  • Assign / unassign input to main mix
  • Aux Mix-on-Faders
  • Selectable channel dynamic processing pre / post EQ
  • Additional channel presets
  • Mute function improvements
  • GXD gain settings
  • Wi-Fi connect time reductions and additional connectivity options have been implemented.
  • A file system integrity check is now performed at every start up and repairs are performed if needed.  A message has been added to encourage the use of the Standby button before removing power from the mixer.
  • Fixes for an issue that can result in unexpected low output levels have been implemented.
  • Sample rate is no longer stored / recalled as part of a scene.

Version 1.0.3786

  • Added support for new hardware revision of the Wi-Fi dongle
  • Updated code to support a new hardware version of the supplied Wi-Fi dongle.
  • Info / Help content
  • Info screen errata corrections and clarifications.

Version 1.0.3583

  • Resolved an issue causing loss of track synchronization when recording overdubs.
  • Fixed erroneous Nav Strip clipping indications for Aux 7/8 and 9/10.
  • Implemented a change that displays a pop-up message warning that FAT32 file size limits are approaching after approximately 3 hours of uninterrupted recording.
  • Fixed a problem that caused only one channel of a linked output channel pair to be affected by recalling the Reset preset.
  • Fixed a bug that occurred when iPads are connected and the mixer password is changed.
  • The mixer now displays a “Saving…” message to indicate that recorded files are being finalized and that the USB storage should not be disconnected.
  • FX Returns improperly routed to linked Aux Channels
  • Fixed a discrepancy in how the “FX Returns to Monitors” control routes signal to linked Aux mixes.
  • Fixed a problem that sometimes caused loss of Wi-Fi connectivity under certain circumstances.
  • Resolved an issue whereby the Clear button on the FX Wizard screen caused the FX labels to disappear and the FX Type to change.
  • Fixed and issue that cause linked Auxes to be improperly displayed and enabled in FX Wizard and other screens.
  • Repaired a bug that caused a Stereo Input to be summed to mono when sent to a Linked or Stereo auxiliary mix.
  • Invalid characters associated with certain factory channel names caused an error when the channel setup screen was accessed. These names have been changed to include only supported characters.