Q-SYS Integrated System Platform TSC-7t Tabletop Networked Touch Screen Controller The networked touch-screen controller shall enable control of a Q-SYS system via a color LCD that utilizes capacitive touch technology. The capacitive LCD touch screen shall be 7 inches in diagonal size with a resolution in pixels of 800 horizontal by 480 vertical and a brightness of 400 nits. The controller shall communicate with the Q-SYS system using TCP/IP protocols, and shall display both ready-made and custom user-designed control interfaces created in Q-SYS Designer using the User Control Interface (UCI) Designer, including display of custom full-color graphics. For redundancy, the controller shall connect via two RJ-45 10/100/1000 Mbps ports, and it shall be powered via PoE (Power over Ethernet) or by an external 12-volt DC supply through a 5 mm / 2.5 mm barrel connector. The controller shall have a USB Micro AB type connector with USB On-The-Go (OTG) 2.0 interface to permit AV-to-USB bridging with software applications and video conferencing codecs running on standard PC hardware under all major operating systems. The touch-screen controller shall be mounted in an angled, weighted tabletop base that can be installed free standing or fixed on a through-table mounting pipe. The controller shall have a recessed button that resets the controller to factory default settings when pressed using a paper clip or a similar tool. The touch-screen controller shall be 4.75 in (121 mm) high, 7.75 in (197 mm) wide, and 5 in (127 mm) deep. The networked touch-screen controller shall be the QSC TSC-7t.