The E110 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s DMT (Directivity Matched Transition) design with a wide 85° coverage. When used as a stage monitor, the E110 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
- High output, professional quality sound with 300 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Suitable for main PA and stage monitor
- Available U-Style Yoke and M8 rigging kit for permanent installation
- Dual angle pole socket
|Configuration||1 × 10-inch, 2-way, non-powered|
|Frequency Response (-6 dB)||68Hz – 20kHz|
|Frequency Range (-10 dB)||50Hz - 20kHz|
|Power capacity²: continuous/peak||300 W / 1200 W|
|Sensitivity||95 dB, 1 W @ 1 m|
|Coverage Angle||85° conical DMT|
|Output1 (Peak SPL @ 1m)||126 dB|
254 mm (10 in) driver with 64 mm (2.5 in) voice coil;
25 mm (1 in) exit, 45 mm (1.75 in) voice coil, compression driver
|Cross-over||Full-range only, 1.8 kHz|
|Input Connections||2 × NL4, 1 × barrier strip|
|Enclosure||Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.|
|Mounting and suspension||9 × M8 suspension points, dual angle, 35 mm pole-socket|
|Speaker Dimensions |
|330 × 560 × 330 mm |
13 × 22 × 13 in
|Carton Dimensions (H×W×D)||430 × 430 × 660 mm |
17 × 17 × 26 in
|Net speaker weight||20 kg / 44 lb|
|Shipping weight||23 kg / 50 lb|
1 With QSC Processing
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.
*Preliminary specifications are subject to change.