E12


The E12 is a trapezoidal, two-way loudspeaker using a 12-inch die cast aluminum woofer with a 3-inch voice-coil. The 15mm, 11-ply enclosure provides enough volume to deliver solid low-frequency extension down to 65 Hz making it an excellent choice for applications in which space or budget preclude the use of a subwoofer. The DMT coverage angle of 85° is ideal for most medium and medium-long throw applications.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke. 

Features

  • High output, professional quality sound with 400 W continuous power
  • E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  • E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:

             - For PLD/CXD visit Amplifier Navigator Software
             - For GXD visit the GXD Firmware Updater

  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket
Model E12
Configuration  1 x 12-inch, 2-way, non-powered
Frequency Response (-6 dB) 64Hz – 20kHz
Frequency Range1 (-10 dB) 46Hz – 20kHz
Power capacity²: continuous/peak 400 W / 1600 W
Sensitivity 96 dB, 1 W @ 1 m
Coverage Angle 85° conical DMT
Output1 (peak SPL @ 1m) 128 dB

Drivers

LF

HF

 

305 mm (12-inch) driver with 76 mm (3-inch) voice coil

25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver 

Nominal Impedance
Cross-over Full range only, 1.8 kHz
Input Connections 2 x NL4, 1 x barrier strip
Enclosure Trapezoidal, plywood, black texture paint finish. Two side-mounted handles. Perforated, powder-coated steel grille with foam lining.
Mounting and suspension 6 x M8 suspension points, dual angle, 35 mm pole-socket
Net Weight 23 kg / 51 lbs
Shipping Weight 26 kg / 57.5 lbs
Dimensions
(WxHxD) 

360 x 616 x 371 mm

14.2 x 24.2 x 14.6 in

   

1 With QSC Processing
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.

*Preliminary specifications are subject to change.