Previous Releases

Amplifier Navigator Release 2.2.7.0

October 20, 2016

  • New loudspeakers – QSC AD-C4T, AD-C4T-LP, AD-C6T, AD-C6T-LP, AD-P4T, and AD-P6T
  • Improvements in the signal flow for the PLD amplifiers (remove hidden CXD elements to streamline operation)
  • Improvements in the GPI code for the CXD amplifiers (prevents invalid values)
  • Other bug fixes and improvements

Windows

  • Windows 7
  • Windows 8
  • Windows 8 Pro
  • Windows 10
    (install in Windows 7 compatibility mode)

Mac

  • OSX Mavericks (10.9)
  • OSX Yosemite (10.10)
  • If a firmware update to an amplifier fails two times, reset the amplifier by unplugging from the power source, restarting Amplifier Navigator, and try again.
  • If the firmware update is successful but the amplifier does not come back online, reset the amplifier by turning the power off then on. The amplifier will come back on with the correct firmware version.

DPA amplifier Preset library files created with 1.3.3 or later need to be renamed to work correctly in Amplifier Navigator. The extension should be changed from “.plf” to “.DPA.plf”. For example, a preset library file called “MyPresets.plf” containing presets from a DPA amplifier should be renamed “MyPresets.DPA.plf”.

Amplifier Navigator Release 2.2.5

June 30, 2016

  • New loudspeakers – QSC E Series, AP-212sw, and and other manufacturer loudspeakers (Community Loudspeakers) in the PLD/CXD.  Added SR-1290, SR-1590, SR26, and SB-2180 in the DPA amplifiers.
  • Enabled 5th and 7th order Butterworth options in the Highpass and Lowpass filters.
  • Lowered minimum RMS Limiter Attack and Release times.
  • Added the ability to extract the amplifier logs for transmission to Technical Services.
  • Bug fixes and improvements

Windows

  • Windows 7
  • Windows 8
  • Windows 8 Pro
  • Windows 10
    (install in Windows 7 compatibility mode)

Mac

  • OSX Mavericks (10.9)
  • OSX Yosemite (10.10)

DPA amplifier Preset library files created with 1.3.3 or later need to be renamed to work correctly in Amplifier Navigator. The extension should be changed from “.plf” to “.DPA.plf”. For example, a preset library file called “MyPresets.plf” containing presets from a DPA amplifier should be renamed “MyPresets.DPA.plf”.

  • If a firmware update to an amplifier fails two times, reset the amplifier by unplugging from the power source, restarting Amplifier Navigator, and try again.
  • If the firmware update is successful but the amplifier does not come back online, reset the amplifier by turning the power off then on. The amplifier will come back on with the correct firmware version.

QSC has tested and qualified two USB extenders using CAT-6 cabling for use when updating amplifier firmware. The two USB extenders are:

  • Icron 1-port USB 2.0 Ranger 2201. Reliable to 300 feet (91.4 Meters).
  • SIIG USB 2.0 4-Port Extender (JU-EX0111-S1). Reliable under 50 feet (15.2 Meters).

Amplifier Navigator Release 2.1.10

Nov 12, 2015

  • New Custom Graphics allowing any user graphic to be put on the Home screen
  • New QSC loudspeakers including QSC AC-S6T and AC-S4T as well as SR-5152 (DPA only)
  • New user FIR filters (advanced feature for Loudspeaker Manufacturers)
  • New ability to “hide” DSP processing parameters (advanced feature)
  • Bug fixes and stability improvements

Windows

  • Windows 7
  • Windows 8
  • Windows 8 Pro
  • Windows 10
    (install in Windows 7 compatibility mode)

Mac

  • OSX Mavericks (10.9)
  • OSX Yosemite (10.10)

DPA amplifier Preset library files created with 1.3.3 or later need to be renamed to work correctly in Amplifier Navigator. The extension should be changed from “.plf” to “.DPA.plf”. For example, a preset library file called “MyPresets.plf” containing presets from a DPA amplifier should be renamed “MyPresets.DPA.plf”.

  • If a firmware update to an amplifier fails two times, reset the amplifier by unplugging from the power source, restarting Amplifier Navigator, and try again.
  • If the firmware update is successful but the amplifier does not come back online, reset the amplifier by turning the power off then on. The amplifier will come back on with the correct firmware version.

QSC has tested and qualified two USB extenders using CAT-6 cabling for use when updating amplifier firmware. The two USB extenders are:

  • Icron 1-port USB 2.0 Ranger 2201. Reliable to 300 feet (91.4 Meters).
  • SIIG USB 2.0 4-Port Extender (JU-EX0111-S1). Reliable under 50 feet (15.2 Meters).

Amplifier Navigator Release 2.0.33

March 12, 2015 - Critical bug fix - update addresses an issue experienced by some users relating to amplifiers coming out of Standby

Windows

  • Windows 7
  • Windows 8
  • Windows 8 Pro

Mac

  • OSX Mavericks (10.9)
  • OSX Yosemite (10.10)

DPA amplifier Preset library files created with 1.3.3 or later need to be renamed to work correctly in Amplifier Navigator. The extension should be changed from “.plf” to “.DPA.plf”. For example, a preset library file called “MyPresets.plf” containing presets from a DPA amplifier should be renamed “MyPresets.DPA.plf”. - See more at: qsc.com/resources/software/amplifier-navigator/amplifier-navigator-archive/amplifier-navigator-release-2033-new/

  • If a firmware update to an amplifier fails two times, reset the amplifier by unplugging from the power source, restarting Amplifier Navigator, and try again.
  • If the firmware update is successful but the amplifier does not come back online, reset the amplifier by turning the power off then on. The amplifier will come back on with the correct firmware version.

- See more at: qsc.com/resources/software/amplifier-navigator/amplifier-navigator-archive/amplifier-navigator-release-2033-new/

QSC has tested and qualified two USB extenders using CAT-6 cabling for use when updating amplifier firmware. The two USB extenders are:

  • Icron 1-port USB 2.0 Ranger 2201. Reliable to 300 feet (91.4 Meters).
  • SIIG USB 2.0 4-Port Extender (JU-EX0111-S1). Reliable under 50 feet (15.2 Meters).
  • New Amplifier Input and Output Level Monitoring
  • New Input Gain and Sensitivity control
  • New Output Source Selection and Mixing (CXD only)
  • New Output Gain and Polarity control
  • New Output Crossover and EQ adjustment
  • New Output Delay control and increased maximum Delay to 75 ms
  • New Output Limiter control
  • New Amp History including Temperature, AC Voltage and Current, and Impedance
  • New Display control
  • New GPIO setup functionality (CXD only)
  • New ability to Save and Recall Loudspeakers from the amp's internal library or libraries stored on the PC (or Mac)
  • New ability to Save and Recall Presets from the amp's internal library or libraries stored on the PC (or Mac)
  • New ability to create and manage Preset and Speaker Files and Libraries
  • New ability to put all amps in/out of Standby
  • New loudspeaker products including QSC AC-C, AD-C, and AD-S models as well as new SC, SB, and SR (DPA only).  Our list of third party products now includes the following brands: B52, Cerwin-Vega, Classic Pro, Electro-Voice, JBL, Martin Audio, Nexo, Peavey, and Yamaha (All third party presets are not officially sanctioned by the manufacturer but were created using manufacturer published data) [Cerwin-Vega® is a registered trademark of Cerwin-Vega, Electro-Voice is a registered trademark of Telex Communications, JBL is a trademark of HARMAN International Industries, Martin Audio is a registered trademark of Martin Audio Ltd., NEXO®is a registered trademark of NEXO SA., Peavey® is a registered trademark of Peavey Electronics Corporation, YAMAHA is a registered trademark of Yamaha Corporation]
  • Bug fixes and improvements

We use cookies to understand how you use our site and to improve your experience. By continuing to use our site, you accept our use of cookies, Cookie Policy, Privacy Policy and Terms and Conditions.