Synapse D32o

Dante™/AES67 Networked Audio Interface (Attero Tech by QSC)

The Attero Tech by QSC Synapse D32o is a high-performance networked audio interface supporting Dante™ with AES67 interoperability. It features 32 balanced line level outputs with digitally controlled attenuation from 0 to -100 dB. All outputs are available independently for routing from the Dante / AES67 network audio interfaces.


Connect to Q-SYS Reflect Enterprise Manager

This peripheral can be automatically connected to your Q-SYS Reflect Enterprise Manager, a powerful monitoring and management platform for the Q-SYS Ecosystem.

Start your free trial today!

Key Features

  • 32 balanced line level outputs 
  • Front panel for network audio level control
  • Software-controllable output matrix routing  
  • Pairs with the Attero Tech by QSC Synapse D32i for high quality network audio signal extension, or driving large racks of analog input amplifiers
  • Available Q-SYS Control plugin – no programming required

Synapse D32o Specifications:

Analog Outputs  
Maximum output level +24 dBu
Output impedance 200 Ω
Output type 3-pin XLR-F
Headphone Output  
Connector 0.25 in TRS jack
Controls Mute / volume encoder
Load 32 Ω minimum
Audio Networking  
Protocol support Dante™ with AES67 support
Channel count 32 Dante RX
Modes Switched or Redundant mode
Ports 2 x 1 Gb copper on RJ-45, 2 x 1 Gb SFP
General  
Dimensions (HWD) 1.75 x 19 x 12.5 in
(44.5 x 482.6 x 5080 mm)
Weight 6 lb (2.72 kg)