Synapse D32Mi

Dante™/AES67 networked audio interface (Attero Tech by QSC)

The Attero Tech by QSC Synapse D32Mi a high-performance, high-channel density networked audio interface supporting Dante™ with AES67 interoperability. It features 32 studio-grade mic/line preamps and is designed to address the needs of a wide range of commercial audio connectivity applications. It also offers quick access to gain, mute and phantom power controls along with front panel headphone access for local input and Dante™ confidence monitoring.


Key Features

  • 32 studio-grade mic/line preamps with line level capabilities 
  • Front panel offers network audio level control
  • High performance analog-to-digital conversion on terminal block connectors.
  • Software selectable pad can be configured for professional (+4 dBu) or consumer (-10 dBV) input levels for each 16 channel input bank.
  • Available Q-SYS control plugin – no programming required

Synapse D32Mi Specifications:

Mic/Line Inputs  
Maximum input level +24 dBu (pad active - Line mode)
Input impedance 2k Ω (mic) | 10k Ω (line)
Input type 3-pin depluggable terminal block
Analog Outputs  
Maximum output level +24 dBu
Output impedance 200 Ω
Headphone Output  
Connector 1/4 in TRS jack
Controls Mute / volume encoder
Load 32 Ω minimum
Audio Networking  
Protocol support Dante™ with AES67 support
Channel count 32 Dante RX, 2 Dante RX
Modes Switched or Redundant mode
Ports 2 - Gb copper on RJ-45, 2 - Gb SFP
General  
Dimensions (HWD) 1.75 x 19 x 12.5 in
(44.5 x 482.6 x 5080 mm)
Weight 6 lb (2.72 kg)