Axiom ML1

Audio extension I/O module (Attero Tech by QSC)

The Attero Tech Axiom ML1 provides installation-friendly and intuitive analog audio extension (via CAT-5 or greater) of analog microphone and line level sources for cost-sensitive applications such as small and medium sized retail, restaurant, education and hospitality venues. The ML1 must be paired with the Attero Tech by QSC AXP2O (sold separately) to operate. AXP20 outputs the necessary analog signal from ML1 into an AV system, mixer or other audio destination.


Key Features

  • XLR input provides connectivity for dynamic microphones with 50 dB of adjustable gain
  • ¼” connector includes a fixed attenuator pad for +4 dBu nominal input levels
  • 3.5 mm jack provides consumer (-10 dBV nominal) input level with 20 dB of adjustable gain and is summed to mono
  • Audio signal level indicator LEDs for each input provide quick feedback for proper input gain adjustments
  • Selectable sum-to-mono option for both inputs, allowing 2 ML1s or another Axiom device to be daisy-chain connected on a single bus

Axiom ML1 Specifications:

Audio Inputs (Mic/Line)  
Connector type 3.81 mm Euro, 3 position (16-28 AWG)
Gain -8 dB to +34 dB gain, 1 dB increments
Input impedance >2 KΩ at any gain
Maximum input level -8 dB gain, max input = +16.5 dBu (+24 dBuw/pad)
Frequency response 20-20 kHz, +/- 1 dB (Line),
50-20 kHz +/- 1 dB (Mic)
Audio Line Outputs  
Connector type 3.81 mm Euro-block, 3 position (16-28 AWG)
Maximum output levels +24 dBu (-15.5 dBU w/pad)
Frequency response 20-20 kHz, +/- 1 dB (Mic/Line)
Dynamic range 100 dB
Network  
Physical layer Ethernet
Connector (s) Dual RJ-45
Cable quality CAT-5e or better, UTP
Transmission speed 1 Gbps
General  
Dimensions (HWD) 1.6 x 7.4 x 8 in
(40.6 x 188 x 203 mm)
Weight 2.1 lbs (0.95 kg)
Mounting options Rack-mountable, 1 RU 1/3-rack width
Surface-mountable
*All mounting hardware offered as
accessories