NV Series (NV-32-H)
Network Video Endpoint for the Q-SYS Ecosystem


The Q-SYS NV-32-H is a network video endpoint native to the Q-SYS Ecosystem, serving as a multi-stream, software-configurable HDMI encoder/decoder that enables network-based video distribution. Optimized for the meeting room, the NV-32-H delivers the right balance of high quality (supporting resolutions up to 4K60 4:4:4), low-latency and network-efficient video distribution across a standard gigabit infrastructure.
Features and Benefits

Streamlined video streaming integration for the Q-SYS Ecosystem: Enables native HDMI and audio distribution without additional control processors, bridges or complicated programming.
Optimized for the connected meeting space: Delivers the right balance of quality, latency, network efficiency and scalability for meeting room video applications.
Native integration and control: Simplifies setup, configuration, and firmware management and eliminates the need for advanced programming knowledge.

Unique flexibility and interoperability in a single device: The NV-32-H is software-defined as either an encoder or decoder inside Q-SYS Designer Software, and offers I/O capabilities that provide maximum design flexibility with less hardware.
Network optimized compression scheme: Q-SYS Shift™ video compression codec dynamically adjusts network bandwidth consumption based on video content, affording massive network savings for common meeting room content without compromising on full-motion video content.
Simultaneous streaming: With 3x HDMI inputs and 2x HDMI outputs, the NV-32-H enables emerging room design scenarios, such as simultaneous 1080p60 streaming for dual-monitor rooms, with a single device. It also enables soft codec applications that support dual video output.
Configuration Options






__________________________________________________________________________________________

- Actively adjusts network bandwidth according to the content, affording massive network savings for common meeting room content.
- Modes: Multicast and Unicast
- Bitrates: 10 Mbps - 800 Mbps
- Streaming Protocol: RTP
- Content Protection: HDCP 2.2 compliant, AES-128 encryption for all audio and video signals between encoders and decoders
__________________________________________________________________________________________
Specifications
Encoding/Decoding | |||
Video compression | Q-SYS Shift™ compression codec | ||
Bitrates | 10 Mbps - 800 Mbps | ||
Content protection | HDCP 2.2 compliant, AES-128 encryption for all audio and video signals between encoders and decoders | ||
Audio I/O | |||
HDMI inputs | 8-channel PCM audio, Q-SYS routable | ||
HDMI outputs | 8-channel PCM audio, Q-SYS routable | ||
Analog input | 3.5 mm unbalanced stereo mic/line input Q-SYS routable | ||
Analog output | 3.5 mm unbalanced stereo line output Q-SYS routable | ||
Video I/O | |||
HDMI 2.0 inputs | 3x HDMI capable of receiving source input video formats up to 4K60 4:4:4 | ||
HDMI 2.0 outputs | 2x HDMI capable of scaling and outputting video formats up to 4K60 4:4:4 | ||
Scaler | Each HDMI output features a robust 4K60 4:4:4 scaler that can accommodate the most challenging resolution and frame rate conversions | ||
Connectors | |||
RS-232 | Three-pin Euroblock terminal connector for extension of Q-SYS control to third-party devices, user configurable | ||
GPIO | Euroblock terminal connector for extension of Q-SYS control to third-party devices, user configurable | ||
LAN A | Gigabit LAN connection for interfacing with Q-LAN. PoE 802.3bt Type 4 for power. | ||
LAN B | No functionality at initial release | ||
Audio input | Signal to Noise: 90 dBFS | ||
THD+N: 0.009% @ 0 dB | |||
Audio output | Signal to Noise: 90 dBFS | ||
THD+N: 0.0167% @ 0 dB | |||
Power | |||
Power over Ethernet specification/wattage | Conforms to IEEE 802.3bt Type 4 | ||
Physical power supply info | 48 V DC Nominal, 1.5 A on 2-pin Euro connector | ||
Environmental | |||
Ambient operating temperature range | 0-50° C | ||
Humidity | 5 to 85% non-condensing | ||
Storage temperature | -20 to 70° C | ||
General | |||
Dimensions | 8.66 in x 11.28 in x 1.72 in | ||
220 mm x 286.6 mm x 43.6 mm | |||
Weight | Weight: 4.0 lb (1.81 kg) | ||
Regulatory compliance | CE, FCC Part 15 Class B, RoHS | ||
Mounting options | Rack-mountable, 1RU half-rack width | ||
Surface-mountable, table or wall-mount | |||
All mounting hardware is included |