Características

  • Modulo de alimentación de 1,000 W
  • Subwoofer ventilado de 18 pulgadas
  • Alta salida acústica (pico máximo SPL de 135 dB)
  • Gama de frecuencias hasta 33 Hz (-10 dB)
  • Amplia DSP mejora aún más y protege el desempeño
  • Conexiones de Entrada y Thru powerCON®
  • Encastre de poste roscado para aplicaciones independientes (sólo modelos en negro)
  • Suspensión posible gracias a los accesorios M10 o el bastidor para arreglos KLA12AF
  • Encastre roscado integrado para montaje en poste que soporta hasta dos cajas KLA12 (sólo modelos en negro)
SPECIFICATIONS KLA181
Configuration 18-inch subwoofer
Transducers
High Frequency
Low Frequency


18-inch cone transducer
Frequency Response (-6 dB) 38 Hz
Frequency Range (-10 dB) 33 Hz
Nominal Coverage -
Maximum SPL (1 meter) 135 dB peak
Amplifiers
Power Output 1000 W Class D continuous
Input Impedance XLR: 40 kΩ balanced / 20 kΩ unbalanced
Controls Power, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
Indicators Power, Signal, Standby, Limit
Connectors Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Painted birch plywood
Finish Black or white textured paint
Grille Black or white powder coated 16 gauge steel
Dimensions (HWD) inches 30 x 28 x 24
Dimensions (HWD) mm 760 x 710 x 610
Net Weight 119.9 lbs (54.4 kg)

All specifications are subject to change without notice.

PowerCON is a trademark of Neutrik. All other trademarks are QSC LLC.