Features

  • Patentierter Mehrfach-Diffraktions-Waveguide sorgt für einen besonders breiten horizontalen Abstrahlwinkel (140°) und eine nahezu ideale vertikale Linienquelle.
  • Außergewöhnlich hohe Ausgangsleistung in einem sehr kompakten Format.
  • Kann im Bi-Amp- oder Tri-Amp-Modus betrieben werden. DSP-Einstellungen verfügbar für Q-SYS, SC-28, PLD- und CXD-Endstufen.
  • Doppelte 10-Zoll-Langhub-Basslautsprecher mit hoher Leistung.
  • Neodym-Kompressionstreiber mit 3-Zoll-Membran.
  • Birkenmultiplexgehäuse. Erhältlich in Standardlackierung schwarz.
  • Integriertes Rigging-System umfasst alle erforderlichen Komponenten zur direkten Verbindung der Boxen.
SPECIFICATIONS WL2102-w
Configuration Biamp or Triamp mode
Transducers
  High Frequency
  Low Frequency

1.4-inch exit, 3-inch titanium diaphragm, neodymium magnet assembly
2 × 400 W, 16 ohm 10-inch woofer, 3-inch voice coil, ceramic magnet assembly
Frequency Response (±3 dB)
Frequency Response (-10 dB) 
55 Hz to 18 kHz (with recommended DSP processing)
48 Hz to 20 kHz (with recommended DSP processing)
Nominal Impedance HF: 16 ohms 
LF biamp mode: 8 ohms 
LF triamp mode: 16 ohms (× 2)
Continuous Power Capacity HF: 80 W (2 hours, AES1984-2 method, 1 to 10 kHz)
LF biamp mode: 600 W (2 hours, AES1984-2 method, 80 to 800 Hz)
LF triamp mode: 400 W (×2) (2 hours, AES1984-2 method, 80 to 800 Hz)
Max Recommended Power HF: 300 W @ 16Ω
LF bi-amp mode: 1400 W @ 8Ω
LF tri-amp mode: 700 W @ 16Ω (x 2)
Sensitivity (1 W at 1 m)
 
HF: 107.5 dB (single cabinet measured in free space.)
LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
Maximum Output (SPL at 1 m)
  Continuous:
  Peak:
HF: 127 dB / LF: 127 dB
HF: 133 dB / LF: 133 dB
Maximum Output (dB SPL at 1 m)
Continuous / Peak

HF: 126 dB / 132 dB
LF: 122 dB / 128 dB
Nominal Coverage Horizontal: 140°
Vertical: Dependent on number of elements used
Enclosure
Cabinet Type Ported, trapezoidal
Material Baltic birch plywood
Finish Available in standard black finish
Grille Perforated, formed powder coated steel
Connectors 2 × Neutrik Speakon® NL8 in parallel
Pinout  
Pins Bi-amp Tri-amp
1+/1- LF MF
2+/2- NC LF
3+/3- NC NC
4+/4- HF HF
 
Attachment Points Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 2 ° to 10° and 0°
Dimensions (H×W×D) 273 × 698.5 × 514.3 mm
10.75 × 27.5 × 20.25 in
Carton Dimensions (H×W×D) 280 × 711 × 533 mm
11 × 28 × 21 in
Net Weight 37.7 kg / 83 lb
Shipping Weight 42.6 kg / 93.9 lb
Accessories Available AF2102-LA

Specifications are subject to change without notice.

Speakon is a trademark of Neutrik