Features and Benefits
Streamlined video streaming integration for the Q-SYS Ecosystem: Enables native HDMI and audio distribution without additional control processors, bridges or complicated programming.
Optimized for the connected meeting space: Delivers the right balance of quality, latency, network efficiency and scalability for meeting room video applications.
Native integration and control: Simplifies setup, configuration, and firmware management and eliminates the need for advanced programming knowledge.
Unique flexibility and interoperability in a single device: The NV-32-H is software-defined as either an encoder or decoder inside Q-SYS Designer Software, and offers I/O capabilities that provide maximum design flexibility with less hardware.
Network optimized compression scheme: Q-SYS Shift™ video compression codec dynamically adjusts network bandwidth consumption based on video content, affording massive network savings for common meeting room content without compromising on full-motion video content.
Simultaneous streaming: With 3x HDMI inputs and 2x HDMI outputs, the NV-32-H enables emerging room design scenarios, such as simultaneous 1080p60 streaming for dual-monitor rooms, with a single device. It also enables soft codec applications that support dual video output.
(Click each image for a larger view)
- Actively adjusts network bandwidth according to the content, affording massive network savings for common meeting room content.
- Modes: Multicast and Unicast
- Bitrates: 10 Mbps - 800 Mbps
- Streaming Protocol: RTP
- Content Protection: HDCP 2.2 compliant, AES-128 encryption for all audio and video signals between encoders and decoders
|Supported Video Formats|
|Resolution||Frame Rate (Hz)||Chroma Sampling Level|
|3840 x 2160 (4K UHD)||60, 59.94, 50, 30, 29.97, 25, 24||4:4:4|
|2560 x 1600||60||4:4:4|
|1920 x 1200||60||4:4:4|
|1920 x 1080 (1080p)||60, 59.94, 50, 30, 29.97, 25, 24||4:4:4|
|1280 x 720 (720p)||60, 59.94, 50, 30, 29.97, 25, 24||4:4:4|
*All video formats are progressive
|Video compression||Q-SYS Shift™ compression codec|
|Bitrates||10 Mbps - 800 Mbps|
|Content protection||HDCP 2.2 compliant, AES-128 encryption for all audio and video signals between encoders and decoders|
|HDMI inputs||8-channel PCM audio, Q-SYS routable|
|HDMI outputs||8-channel PCM audio, Q-SYS routable|
|Analog input||3.5 mm unbalanced stereo mic/line input |
|Analog output||3.5 mm unbalanced stereo line output |
|HDMI 2.0 inputs||3x HDMI capable of receiving source input video formats up to 4K60 4:4:4|
|HDMI 2.0 outputs||2x HDMI capable of scaling and outputting video formats up to 4K60 4:4:4|
|Scaler||Each HDMI output features a robust 4K60 4:4:4 scaler that can accommodate the most challenging resolution and frame rate conversions|
|RS-232||Three-pin Euroblock terminal connector for extension of Q-SYS control to third-party devices, user configurable|
|GPIO||Euroblock terminal connector for extension of Q-SYS control to third-party devices, user configurable|
|LAN A||Gigabit LAN connection for interfacing with Q-LAN. PoE 802.3bt for power.|
|LAN B||No functionality at initial release|
|Audio input||Signal to Noise: 90 dBFS|
|THD+N: 86 dBFS|
|Audio output||Signal to Noise: TBD|
|Power over Ethernet specification/wattage||Conforms to IEEE 802.3bt|
|Physical power supply info||48 V DC +/- 15% 1.5 A on Euroblock terminal connectors|
|Ambient operating temperature range||0-50° C|
|Humidity||5 to 85% non-condensing|
|Storage temperature||-20 to 70° C|
|Dimensions||8.66 in x 11.28 in x 1.72 in|
|220 mm x 286.6 mm x 43.6 mm|
|Weight||Weight: 4.0 lb (1.81 kg)|
|Regulatory compliance||CE, FCC Part 15 Class B, RoHS|
|Mounting options||Rack-mountable, 1RU half-rack width|
|Surface-mountable, table or wall-mount|
|All mounting hardware is included|