DPA-8K8Q

The Q-SYS DPA-Q Series network amplifiers combine a legacy of robust power amplifiers, advancements in high-efficiency output devices and native network transport, control and monitoring capabilities.
Features
- Seamless Q-SYS integration with audio transport and control via standard gigabit Ethernet protocols and hardware
- Capable of providing up to 8,000W of power
- Hybrid circuit topology mixing the robustness of the PL380 PowerLight™ amplifier platform with new high-voltage output devices
- FlexAmp™ allows for asymmetric power distribution across amplifier channels
- Flexible Amplifier Summing Technology™ optimizes for either higher voltage loads (up to 200 Vrms output) or high current loads (up to 35 A)
- PowerLight universal switchmode power supply with PFC for highest efficiency, improved audio performance, and low weight
- “Q” models offer mic/line inputs into the Q-SYS Ecosystem; “Qn” models are “network input only” to reduce system cost
- Touch-proof Euroblock loudspeaker connections
- Eight bi-directional GPIO connections plus relay
- Automatic energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality
General Specifications
DPA-4K8Q | DPA-8K8Q | |
Typical distortion 8Ω 4Ω | 0.02–0.05% 0.04–0.1% | 0.02–0.05% 0.04–0.1% |
Maximum distortion (4Ω-8Ω) | 1.00% | 1.00% |
Frequency response (8Ω) | 20 Hz–20 kHz ±0.3 dB | 20 Hz–20 kHz ±0.3 dB |
Noise Unweighted Output Muted Weighted Output Muted | -101 dB -104 dB | -101 dB -104 dB |
Gain (1.2V setting) | 35 dB | 38 dB |
Damping factor | >100 | >100 |
Input impedance | >8k balanced and >4k unbalanced | >8k balanced and >4k unbalanced |
Input Sensitivity Continuously variable: Vrms dBu dBv | 1.23mV to 17.35V -56 to 27 -58.2 to 24.8 | 1.23mV to 17.35V -56 to 27 -58.2 to 24.8 |
Amplifier and load protection | Short circuit, open circuit, over current, over voltage, thermal, RF, DC fault shutdown, active inrush limiting, on/off muting | |
AC power input | Universal Power Supply 100–240 VAC, 50–60 Hz | |
Agency approvals | UL, CE, RoHS/WEEE compliant, FCC Class B (conducted and radiated emissions) | |
Carton contents | IEC Cable, Quick Start Guide, Euro (green) Connectors |
Power Specifications
DPA-4K8Q | DPA-8K8Q | ||
Max Power | Max Power | ||
8 Independent Channels A, B, C, D, E, F, G, H | 8Ω | 1000 W | 1250 W |
4Ω | 1000 W | 1500 W | |
2Ω | 1000 W | 1200 W | |
2 Channels BTL Bridged A+B or C+D or E+F or G+H Doubles Voltage
| 8Ω | 1500 W | 3000 W |
4Ω | 1400 W | 1700 W | |
2Ω | NR* | NR* | |
2 Channels Parallel AB or CD or EF or GH Doubles Current
| 8Ω | 1000 W | 1250 W |
4Ω | 1250 W | 2400 W | |
2Ω | 1500 W | 2500 W | |
3 Channels Combined in Parallel ABC or EFG Triples Current
| 8Ω | 1000 W | 1250 W |
4Ω | 1500 W | 2000 W | |
2Ω | 1500 W | 2500 W | |
4 Channel Bridged/Parallel AB+CD, EF+GH Doubles Current and Voltage
| 8Ω | 2500 W | 4000 W |
4Ω | 3000 W | 5000 W | |
2Ω | NR* | NR* | |
4 Channels Combined in Parallel ABCD or EFGH Quadruples Current
| 8Ω | 1000 W | 1200 W |
4Ω | 2000 W | 2400 W | |
2Ω | 2500 W | 4000 W | |
1Ω | 3000 W | 4000 W |
NR* = Not Recommended due to excessive current draw
Controls, Indicators and Connections
DPA-4K8Q / DPA-8K8Q | |
Controls and indicators (front) | Power • Channel MUTE Buttons • Channel SELECT buttons • Channel Input Signal and CLIP LED Indicators • Channel Output and LIMIT LED Meters • NEXT, PREV, ID Buttons • Control Knob |
Controls and indicators (rear) | AC power disconnect (IEC C-14) |
Input connectors | 3-pin Euro (green) and Q-LAN Network connectivity, GPIO |
Output connectors | 8-pin Euro (green) |