Passive loudspeakers from QSC

E系列产品是一组无源扬声器，结构牢固、性能可靠，总体音效表现超出预期。E系列扬声器用于增强娱乐应用声效，在现场演出、DJ和舞曲中、卡拉OK及重大活动的音频制作中，均呈现杰出效果。基于QSC实践证明可行的“系统性”方法打造，E系列扬声器可与QSC的GXD或PLD功率放大器、TouchMix数字调音台搭配使用，进一步增强性能表现，充分利用内置DSP以及出厂预设功能。这些预设支持多种应用，包括现场声效增强（有无重低音扬声器均可）、舞台监听、舞曲和卡拉OK。

E系列包含六个型号，均采用坚固胶合板打造，黑色纹理漆饰。耐用型钢罩带有泡沫衬里，可有效保护低音扬声器，外观优雅。E110、E112和E115型扬声器都提供了全金属、双角度35毫米支杆插座，支持扬声器垂直安装或以10°倾角安装使用，可以进一步提高听音区音效，减少后墙面回声。E系列Yoke支架套件或M8/M10型吊环螺栓支持多种安装方式。输入接头包括双NL4接头和螺纹接线柱。此外，所有型号的产品均配备符合人体工学的铝制把手，便于移动。

E系列娱乐系统DSP调试功能支持PLD、CXD和GXD处理放大器使用。

查看PLD/CXD请访问Amplifier Navigator Software
查看GXD请访问GXD Firmware Updater

Model	E110	E112	E115
Configuration	1 x 10-inch, 2-way non-powered	1 x 12-inch, 2-way non-powered	1 x 15-inch, 2-way non-powered
Frequency Response (-6 dB)	68 Hz – 20 kHz	64 Hz – 20 kHz	55 Hz – 20 kHz
Frequency Response (-10 dB)	50 Hz - 20 kHz	46 Hz – 20 kHz	43 Hz – 20 kHz
Power capacity²: continuous/peak	300 W / 1200 W	400 W / 1600 W	500 W / 2000 W
Sensitivity	95 dB, 1 W @ 1 m	96 dB, 1 W @ 1 m	97 dB, 1 W @ 1 m
Coverage Angle	85° conical DMT	85° conical DMT	75° conical DMT
Output¹ (Peak SPL @ 1M)	126 dB	128 dB	130 dB
Drivers LF HF	254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil; 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver	305 mm (12-inch) driver with 76 mm (3-inch) voice coil 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver	381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver
Nominal Impedance	8 Ω	8 Ω	8 Ω
Cross-over	Full-range only, 1.8 kHz	Full-range only, 1.8 kHz	Full-range only, 1.55 kHz
Input Connectors	2 x NL4 1 x barrier strip	2 x NL4 1 x barrier strip	2 x NL4 1 x barrier strip
Enclosure	Multi-angle, plywood, black texture paint finish. One top mounted handle. Perforated, powder-coated steel grille with foam lining.	Trapezoidal, plywood, black texture paint finish. Two side mounted handles. Perforated, powder-coated steel grille with foam lining.	Trapezoidal, plywood, black texture paint finish. Two side mounted handles. Perforated, powder-coated steel grille with foam lining.
Mounting and suspension	4 x M8 suspension points, dual angle, 35 mm pole-socket	3 x M10 suspension points, dual angle, 35 mm pole-socket	3 x M10 suspension points, dual angle, 35 mm pole-socket
Net Weight	20 kg / 44lbs	23 kg / 51 lbs	31 kg / 68 lbs
Dimensions (WxHxD)	330x560x330 mm 13x22x13 in	360x616x371 mm 14.2x24.2x14.6 in	420x716x445 mm 16.5x28.2x17.5 in
	Details	Details	Details
¹ With QSC Processing ² Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct. Specifications are subject to change with out notice.

Model	E118SW
Configuration	1 x 18-inch, subwoofer non-powered
Frequency Response (-6 dB)	37 Hz to 230 Hz
Frequency Response (-10 dB)	32 Hz - 230 Hz
Power capacity²: continuous/peak	800 W / 3200 W
Sensitivity	98 dB, 1 W @ 1 m
Coverage Angle	N/A
Output¹ (Peak SPL @ 1M)	133 dB
Drivers LF HF	457 mm (18-inch) driver with 102 mm (4-inch) voice coil N/A
Nominal Impedance	4 Ω
Cross-over	Recommended 80 – 120 Hz LPF
Input Connectors	2 x NL4 1 x barrier strip
Enclosure	Rectangular, plywood, black texture paint finish. Four side mounted handles. Rear panel provision for optional 3" casters. Perforated, powder-coated steel grille with foam lining.
Mounting and suspension	M20 threaded pole mount socket, 24" (610 mm) pole included
Net Weight	43 kg / 95 lbs
Shipping Weight	48 kg / 106 lbs
Dimensions (WxHxD)	590x616x605 mm 23.2x24.2x23.8 in
	Details
¹ With QSC Processing ² Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct. Specifications are subject to change with out notice.

选择型号

Resources