Amplifier Navigator

远程控制监测PLD放大器

功放向导软件支持用户远程控制监测所有已连接的PLD放大器功能，包括内置DSP功能和功放设置。同时也可从PC或Mac中或者向其中创建、存储和调用预设和扬声器文档。

上传文档，与功率放大器连接，可向多功能机架中的相同放大器“克隆”文档内容。Amplifier Navigator V2.0提供硬件管理功能 - 如果将一至两个放大器连接至电脑，运行Amp Navigator，即可升级固件至最新版本。未来新版本会提供更多功能

QSC拥有两个已经验证和认定的USB端口，升级功放硬件时需使用CAT-6线缆。两个USB端口分别为：

  • Icron 1端口USB 2.0 Ranger 2201.有效传输距离为91.4米（300英尺）。
  • SIIG USB 2.0 4端口（JU-EX0111-S1）。有效传输距离为15.2米（50英尺）。

Amplifier Navigator Release 2.4.2.1

May 7, 2020

  • New updated Presets voicing for WideLine WL-3082 line array loudspeaker.
  • Update to loudspeaker presets library:  QSC Acoustic Design Series Sub/Sat loudspeakers including AD-S.SAT, AD-S.SUB, AD-P.SAT, AD-P.SUB, AP-C.SAT, AD-C.SUB (CXD/PLD) as well as the new AD-S6 and AD-S402T have been added to the CXD and PLD line.
  • Update to the DPA Series: SC-222, SC-222X, SC-223, SC-223X, SR-800 and SR-1000 have been added.
  • Bug fixes and improvements including improved Mac OSX support.
  • Installation of complete loudspeaker presets library for newly installed, as well as updated version, of Amplifier Navigator software

Windows

  • Windows 7
  • Windows 8
  • Windows 8 Pro
  • Windows 10
    (install in Windows 7 compatibility mode)

Mac

  • OSX Mavericks (10.9)
  • OSX Yosemite (10.10)
  • If a firmware update to an amplifier fails two times, reset the amplifier by unplugging from the power source, restarting Amplifier Navigator, and try again.
  • If the firmware update is successful but the amplifier does not come back online, reset the amplifier by turning the power off then on. The amplifier will come back on with the correct firmware version.

DPA amplifier Preset library files created with 1.3.3 or later need to be renamed to work correctly in Amplifier Navigator. The extension should be changed from “.plf” to “.DPA.plf”. For example, a preset library file called “MyPresets.plf” containing presets from a DPA amplifier should be renamed “MyPresets.DPA.plf”.

Downloads

Resources