| |
Products / Loudspeakers / AcousticDesign / Surface Mount
AcousticDesign™ Series
AD-S32T
AcousticDesign AD-S32T
The AcousticDesign Series of installation loudspeaker
products from QSC Audio expands with the new
AD-S32T surface mount loudspeaker system.
Designed for background and general purpose audio
playback, the new AD-S32T is attractive, compact and
acoustically matched to the entire AD Series. Rated
for 30 Watts continuous power handling and able to
handle 120 Watt peaks, the AD-S32T is a fully featured
loudspeaker system in a very small package.
The 3" woofer is equipped with a polypropylene cone
for protection in humid environments. The driver
features a synthetic rubber surround and is optimized
to deliver useable low frequency extension below 70
Hz. An additional humbucking magnet provides AV
shielding. The high-frequency device is a 0.75" dome
tweeter with a titanium diaphragm and a cloth surround.
The dispersion of the high frequency is 100° by 100°.
The AD-S32T measures 85 dB SPL sensitivity.
The enclosure is molded from high-impact
polystyrene and is available in black or white.
The aluminum grille is backed with acoustically
transparent foam that provides protection from the
elements. Signal input connections are made with
plated screw terminals and a sealing weather cover
is provided for outdoor applications.
The AD-S32T is unmatched in its installation versatility.
An included ball mount assembly can be attached
to a variety of surfaces or structures. In addition to
attaching to the rear of the cabinet, the ball mount
can be attached to the top of the cabinet for mounting
to an overhead structure or to the bottom of the
cabinet to provide a shelf stand. Also included in
the system is an aluminum yoke mount. This mount
further enhances the AD-S32T mounting options for
either vertical or horizontal installation. The AD-S32T
is equipped with a 70/100 volt transformer with multiple
taps and an 8 ohm bypass.
FEATURES
- 3" polypropylene cone woofer
- 0.75" titanium dome tweeter
- 30 Watts continuous power handling, 120 watts peak
- 70/100 volt multitap transformer with 8 ohm bypass
- Includes ball mount assembly and yoke mount
- Available in black or white
| AD-S32T |
 |
SPECIFICATIONS |
AD-S32T |
| Configuration |
Compact two way, ported enclosure |
Transducers
Low-frequency
High-frequency |
3" (7.6 cm) weather resistant, polypropylene cone woofer
0.75" titanium dome tweeter |
Frequency Range 1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB) |
73 Hz - 20 kHz
65 Hz - 20 kHz |
Maximum Output 2
Calculated Peak Output
Calculated Continuous Output |
105 dB SPL
99 dB SPL |
| Nominal Impedance |
8 ohms switchable |
Power Rating
RMS Power Handling3
Recommended Max Amp Power
|
30 W (100 hours IEC)
60 W RMS |
| Sensitivity |
85 dB, 2.83 V, 1 m, free space (4 pi) |
| Nominal Coverage |
100° x 100° |
TRANSFORMERS |
| Type |
Custom low distortion laminated core, wide bandwidth design |
| Taps |
70 V: 30, 15, 7.5, 3.8 W / 100 V: 30, 15, 7.5 W / 8 ohm bypass |
| Environmental |
Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC 60529 IP-X3 splash rating |
| Agency Rating |
Transformer is Listed UL1876 |
ENCLOSURE |
| Material |
Injection molded, weather resistant high impact polystyrene |
| Finish |
White or black (paintable) |
| Grille |
Heavy duty powder coated aluminum |
| Connectors |
Screw terminals |
| Mounting Hardware |
Ball mount assembly; yoke mount bracket included |
| Weight |
4 lb (1.8 kg) net
10 lb (4.5 kg) shipping (pair) |
1 All frequency ranges specified refer to measured free field response.
2 Calculated SPL at 1m, (free space, 4 pi), speaker operating at rated RMS power with pink noise within specified frequency range
3 Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz - 20 kHz band limiting, 6 dB signal crest factor.
Specifications subject to change without notice.
QSC and the QSC logo are registered trademarks of QSC Audio Products LLC in the U.S. Patent and Trademark office and other countries.
AcousticDesign is a trademark of QSC Audio Products, LLC. All other trademarks are the property of their respective owners.
TOP
|
ACOUSTICDESIGN SERIES
DOCUMENTS
User Manual (PDF 1.7 MB)
AD-S32T User Manual (PDF 1.7MB)
HI-RES IMAGES
AD-S32T with and without grille
RESOURCES
Frequency Response
Enclosure Dimensions
CAD DRAWINGS
AD-S32T (DXF, zipped 1.7MB)
Also available in white
AD-S32T with included Yoke Mount
AD-S32T with included Ball Mount |
