ILA System v2
The Accessible Installation Line Array
Accessories
 |
FB2082-i Array FrameThe FB2082-i array frame supports most flown array applications. Available in black or white.Shackle holes accept 3/4" (20 mm) screw pin anchor shackles |
 |
GS115-sw Ground Stack KitGround stacking is easily accomplished using the GS115-sw Ground Stack Kit. The kit includes two ground stack rails which attach to the rigging straps under the WL118-sw or WL115-sw. These rails provide added stability and allow for ground stacked arrays to be constructed. |
 |
EB2082-i Extension BarThe EB2082-i extension bar supports suspension where the center of gravity is beyond the limits of the FB2082-i. Additionally, the EB2082-i is used for arrays where subwoofers are flown behind the main array. Available in black or white.Shackle holes accept 3/4" (20 mm) screw pin anchor shackles |
 |
PB2082-i Pull-back BarThe PB2082-i pull-back bar is used for pulling back the bottom element of the array for aiming and stability or as the primary suspension component for certain small arrays. Available in black or white.Shackle hole accepts 5/8" (16 mm) screw pin anchor shackle |
 |
QRP-KIT-1 Quick Release PinsKit of four (4) Quick Release Pins for use in lieu of included bolts. |
AB2082-i Angle BracketAllows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually. |
|
LINE ARRAY SYSTEMS
- ILA Installation Line Array
- Introduction & Features
- Specifications
- Enclosure Dimensions
- Accessories
- Image Gallery
- WideLine-10
- WideLine-8
- Weatherized WideLine Systems
DOCUMENTS
ILA Specifications (PDF 408K)User Manual (PDF 2.6MB) 546546464
Structural Certification (PDF 896K)
HI RES IMAGES
Image GalleryCAD DRAWINGS
ILA WL2082-i & WL115-sw 2D (DXF, zipped 207K)ILA WL118-sw 2D & 3D (DXF, zipped 22K) (2D PDF)
ILA Accessories 2D (DXF, zipped 404K)
(Contains: EB2082-i, FB2082-i, PB2082-i, GS115-sw)
ILA WL115-sw 3D discontinued (DXF, zipped 22K)
SOFTWARE
EASE Focus for ILAILA EASE4 DLL (ZIP 357K)
DSP VOICINGS
WL2082-i and WL115-sw Processor SettingsARCHITECT'S & ENGINEER'S SPECIFICATIONS
WL2082-iWL115-sw (discontinued)
 RoHS Compliant |
IMPORTANT NOTE:
Like most line-array systems available today, QSC WideLine and ILA line-arrays require carefully optimized signal processing in order to perform as intended. QSC has developed processing settings for these loudspeaker systems using our SC28, BASIS and Q-Sys digital processing devices. Arriving at these settings requires skilled engineers, sophisticated measurement equipment and repeated listening in various environments.
It is not possible to simply take the parameters from a QSC processor, transfer them to another processor and get the same results. Other processor manufacturers use different algorithms and design techniques that will produce a different transfer function even if the settings are substantially the same. As a result, QSC is unable to provide settings or tuning support for our line array systems when used with any processors other than those specified by QSC.
Signal Processing Requirements
Like most line-array systems available today, QSC WideLine and ILA line-arrays require carefully optimized signal processing in order to perform as intended. QSC has developed processing settings for these loudspeaker systems using our SC28, BASIS and Q-Sys digital processing devices. Arriving at these settings requires skilled engineers, sophisticated measurement equipment and repeated listening in various environments.
It is not possible to simply take the parameters from a QSC processor, transfer them to another processor and get the same results. Other processor manufacturers use different algorithms and design techniques that will produce a different transfer function even if the settings are substantially the same. As a result, QSC is unable to provide settings or tuning support for our line array systems when used with any processors other than those specified by QSC.
ILA array enclosures and fly hardware are available in black or white.
The ILA subwoofers can be flown behind the array to further improve sight lines or if trim height is restricted.