| |
QSC New Product Guide 2008
21 New Products > Infinite Solutions > One Source
AMPLIFIERS
PowerLight 3 Series: PL325, PL340 & PL380
PowerLight 3 Series
PL380 | PL340 | PL325
The PowerLight 3 Series are Pat Quilter's "Ultimate
Analog" amplifiers, designed for the most demanding
concert and live-sound reinforcement applications.
All three models use our latest generation PowerLight
technology – the world's most efficient power supply.
The 8000 watts Class D PL380 shares a clean, efficient
control, connector and indicator layout with the
Class H PL340 (4000 watts) and PL325 (2500 watts).
Click Here for more information about PowerLight 3 Series Amplifiers
GX Series
GX Series: GX3 & GX5
Finally, a QSC amp for the masses. GX Series amplifiers are optimized to deliver the maximum amount of power to the most popular louspeakers used by entertainers with the uncompromising audio quality and reliabilty you can expect from QSC. A more thermally efficient design ensures full power output in a lightweight, compact chassis that can fit in a effects rack. GuardRail(tm) automatically protects the loudspeakers and amplifier from shutdowns or damage no matter how hard you crank it.
The GX3 is ideal for speakers in the 300 watt (program) range, while the GX5 provides full output for 500 watt (program) speakers. Owners of popular 4 ohm loudspeakers will find the 700 watt (4 ohm) power of the GX5 and ideal match.
Click Here for more information about GX Series Amplifiers
DIGITAL / NETWORK
| |
QSControl.net Version 3 |
| |
|
| |
NAC-100 Network Audio Controller |
QSControl.net Version 3 Software
New features include:
- Venue-Wide Design Mode - Design and view an entire system offline without the need for hardware.
- Auto Discovery of devices on the network with one click.
- Global Presets - A collection of Configurations, Snapshots and Masters that can be recalled with a single click.
- Masters - A single Master can access any number of similar slaves, from any number of devices.
- QSCreator custom panel creation tool
Click Here for more about QSControl.net Version 3
QSControl.net 3.0 is available now, go to the download page
NAC-100 Network Audio Controller
This fully networked audio controller adds a new dimension of versatility to QSControl.net systems.
Click Here to learn more about the NAC-100 Controller
SC28 System Controller
SC28 System Controller |
The SC28 is a 2 input, 8 output digital system controller with 48 kHz 24-bit A/D and D/A conversion and 32-bit floating point DSP for uncompromised audio quality. Factory-optimized tunings for QSC loudspeakers implement Intrinsic Correction™, using FIR (Finite Impulse Response) filters.
Click Here for more information about the SC28 System Controller
LOUDSPEAKERS
| |
AD-S32T Loudspeakers |
| |
AD-C42T Ceiling Speaker |
| |
AD-C81Tw Ceiling Speaker |
AcousticDesign Series
AD-S32T | AD-C42T | AD-C81Tw
The ultra-compact AD-S32T is a full-range surface mount loudspeaker incorporating a 3" weather resistant polypropylene cone woofer and 0.75" neodymium tweeter. A 70/100 volt matching transformer is included and can be bypassed for 8 ohm operation. A flexible ball mount assembly and a yoke mount are included for convenient installation options.
Click Here for more details about the AD-S32T
The compact AD-C42T is a fullrange 2-way design employing a 4" weather resistant polypropylene cone woofer in a vented enclosure with a 0.75" titanium dome tweeter with a rubber surround. AcousticDesign
ceiling speakers are shipped ready to install
with a backcan, support bracket, seismic
tab, tile rails, and a paintable grille.
Click Here more details about the AD-C42T
The AD-C81Tw adds low-frequency punch
and excitement to any AcousticDesign
installation, without special installation
procedures. This subwoofer includes an
8" weather resistant, polypropylene
cone woofer with rubber surround in
a vented enclosure with a large port to
minimize turbulence. A switchable 120 Hz
low-pass filter helps to optimize system
performance.
Click Here more details about the AD-C81Tw
HPR Series
HPR122i | HPR152i | HPR153i | HPR151i | HPR181i
The HPR Series combines the simplicity
and versatility of powered loudspeakers
with the advanced technology and legendary
reliability of QSC amplification. With
five models, including the multi-purpose
HPR122i, the HPR Series is ready to work
for you, whether you need vocal reinforcement,
dance music, club PA or full-tilt
stage monitoring.
Unlike powered speakers with low-cost
"chip amps," the HPR Series is built
around high performance discrete-component
power modules. Designed with
thick aluminum heat sinks and using the
same top-quality components and quality
standards as QSC RMX Series amplifiers,
HPR Series power modules deliver the best
possible performance even when pushed
to the limit. Each amplifier channel includes
its own sophisticated signal processing
functions with the parameters individually
optimized for its frequency band.
Click Here for detailed information on all the HPR models
ModularDeign Series Array Link Kits
ALK-MD2 | ALK-MD3
The ALK-MD2 and ALK-MD3 Array Link Kits
allow the user to quickly, easily and cost effectively
assemble arrays of ModularDesign
loudspeaker systems. The ALK-MD2 allows
the construction of arrays that are two
enclosures wide, while the ALK-MD3 can
be used to assemble three-wide arrays.
Arrays can be constructed using any full
range or low-frequency model from the
ModularDesign or ModularDesign Powered
product range: all of these products share
the same trapezoidal form factor. Arrays of
up to six enclosures may be constructed
by using multiple Array Link Kits to add a
second row.
Click Here to read more about the MD Array Link Kits (PDF 646K)
WideLine-8 Line Array System
WL3082 | WL212-sw
Only 20" (508 mm) wide and 9" (229
mm) high, WideLine-8 is so light that a
single crewperson can deploy an array using
the elegant 4-point suspension system.
Weighing in at a "flyweight" 38 lb, it eases
transport requirements to avoid rising fuel
costs. But this ultra-compact system packs
full size line array performance.
Each tri-amplified WL3082 WideLine-8 element
uses a pair of high-power neodymium
8" woofers for low frequencies. To maintain
the wide 140° horizontal dispersion, only
one extends into the mid-range. A 3"
diaphragm, neodymium compression driver
on QSC's patented* multiple aperture
diffraction slot waveguide handles high
frequencies.
The dual-12" WideLine-8 subwoofer (WL212-sw)
provides extraordinary acoustic output from
a miniscule enclosure. Its extremely low
profile (under 15"/ 381 mm) also makes it
a great choice for installed and portable use
in tight quarters. The 4th order bandpass
design produces 135 dB peak SPL, perfectly
matching the fullrange WL3082, and
extends WideLine-8 array output to 32 Hz.
Click Here for more information about the WideLine-8 Line Array System
WideLine Subwoofer
WL218-sw
The WL218-sw is a premium, high-performance, dual 18" subwoofer designed for suspended or ground stacked use in the most demanding touring or installed concert applications. With an impressive combination of punch, low-frequency extension and accuracy, the WL218-sw is an ideal companion for QSC's acclaimed WideLine as well as other professional sound reinforcement systems.
Click Here to read more about the WideLine WL218-sw
|
