 |
|
DCP 200Digital Cinema Processor A Cinema Processor, Booth Monitor and Digital Crossover along with network control and monitoring of DSP, amplifiers and speakers in one integrated package. Everything you need between server and amps. QSC's Digital Cinema Processor, the DCP 200, builds on the legacy of DCM and Basis to provide all booth-mounted signal processing and monitoring functions for Digital Cinema systems that use Basis and DCA amps behind the screen. The DCP 200 offers most of the features of the DCP 300 but at a lower price point for systems that don’t require screen channel crossovers but instead utilize CobraNet™ network audio distribution to additional Basis processors. Designed to be used with QSC's Digital Cinema Amplifiers (DCA) and featuring advanced DSP presets for QSC's Digital Cinema Speakers (DCS), the DCP 200 optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DCP 200 covers cinema systems ranging from three to five screen channels and up to 16 digital inputs. Outboard Basis processors support passive, bi-amp, tri-amp or quad-amp crossovers and subwoofer outputs. The DCP 200 is compatible with all analog cinema processor formats including Dolby® Digital Surround-EX and DTS-ES and features a 10 channel analog input for integration with 35mm audio systems. Features
Digital Signal ProcessingThe DCP 200 digital signal processing capability outperforms traditional analog processors for optimized audio performance. Fader level, 1/3 octave graphic EQ, parametric equalization, polarity, delay and gain can be precisely adjusted for each channel in your system. Basis processors provide passive and active 2-way, 3-way and 4-way crossovers. Advanced crossover presets for QSC DCS speakers speeds system set-up and insures maximum performance.Less Wiring, Faster Set-upDCPs greatly simplify system wiring and set-up, significantly reducing installation time and labor cost. Input to the DCP is provided via standard DB-25 cables from the D-Cinema server and/or 35mm cinema processor. Connections to DCA amplifiers for input and monitor signals are made through a single QSC DataPort / VGA-style cable. All traditional XLR and barrier strip terminations are eliminated. DCPs simplify set-up by using a menu-driven, PC-based software program for configuration. Connection to remote-mounted Basis processors is via RJ45 connectors and Cat. 5 cable. Commonly used configurations can also be saved on a disk, allowing you to quickly load them on other DCPs. All system configuration data is saved to an SD memory card, allowing easy transfer of settings to a new DCP, should replacement ever be required.Advanced Monitor FunctionsIn addition to audio monitoring of processor inputs and outputs, DCPs include QSC's exclusive "load fault" detection. DCPs monitor all surround amplifier outputs and indicate opens and shorts in the speaker system, providing confirmation that all amplifier outputs are functioning properly. In addition, the DCP detects all amplifier clipping, protect modes and heat sink temperature for reporting via SNMP or a QSControl Ethernet monitoring system. QSControl and QSCreator allow for the creation of custom control screens and remote access for fault reporting and diagnosis. The NAC 100 Ethernet remote control panel provides remote operation in a multiplex from anywhere on the local network.Preliminary Specifications
Specifications subject to change without notice |
NETWORK AUDIO SYSTEMSDOCUMENTSDCP Front Panel V.3 (PDF 40K)SOFTWAREDownload DCP Manager softwareRELATED PRODUCTSDCA Series 2-Channel AmplifiersDCA Series 4-Channel Amplifiers DCS Series Digital Cinema Speakers DCP 300 Digital Cinema Processor DCP 100 Digital Cinema Processor
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
